Baja Hood Pin Kits

 

Chrome hold down with Pit Pins hold any hood or deck lid. For extra protection use the locking version.
  
01-00-3017-0 Hood Pin Kit w/Lanyards $ 11.95

Rubber Hood Hold-Downs

Strong black synthetic rubber latches are self-aligning, rattle free and feature plated steel hardware. A must for your Baja Bug.
  
01-00-3016-0 Rubber Hood Hold-Downs, Pair $   8.95

Quick Release Fasteners

These quick release fasteners (Dzus) hold body parts and panels
  
14-823140 DZUS FASTNER BUTTON/ SELF EJECTING, EACH $ 3.95
14-823145 DZUS FASTNER BUTTON/ NON EJECTING, EACH $ 2.95
14-823146 DZUS FASTNER BUTTON/ NON EJECTING WING NUT, EACH $ 3.95
  
14-823150 DZUS FASTNER TAB WITH ATTACHED SPRING, EACH $ 1.95
14-823155 DZUS TAB SPRING ONLY, EACH $ 1.95
14-823165 DZUS FASTNER LIGHTWEIGHT WELD-ON TAB ONLY, EACH $ 1.95
14-823165-1 DZUS FASTNER WELD-ON TAB ONLY, SHORT, EACH $ 1.95
14-823165-2 DZUS FASTNER WELD-ON TAB ONLY, LONG,EACH $ 1.95

Baja Headlight Housing

Designed for use with Baja Kits. Easy installation and adjustment. Features heavy duty plastic housing and chrome trim rings. Uses standard 7" 6 or 12 volt sealed beam. (Bulbs Not Included)
  
01-00-3019-7 BAJA HEADLIGHT HOUSING W/O BULB, each $ 28.95

7"Chrome Headlight Housing

The original Dune Buggy Headlights are great for Buggies, Sandrails and Baja Bugs. Uses standard 7" 6 or 12 volt sealed beam. (Bulbs Not Included)
  
01-00-9307-7 7inch CHROME HEADLIGHT SHELLS, each. $   34.95

7"Chrome Headlight Housing

The same original Dune Buggy Headlight shell as above, but now we offer this housing with a 12-volt H4 55/60 watt bulb.
  
01-00-9305-0 7inch CHROME HEADLIGHT w/ 12-VOLT H4 55/60W BULB, each $   44.95
01-00-9311-0 7inch H4 HEADLIGHT ONLY, ROUND, each $   15.95

Chrome Rectangular Headlight Shell

Popular rectangular Buggy light shells accept standard automotive sealed or Halogen beams (not included).
  
14-941413 CHROME RECTANGULAR HEAD LIGHT SHELL, each  $   31.95

H.D. Headlight Wire Pigtail

Dim light? Worn out wires or just old eyes, sometimes it's hard to tell. Start by replacing those existing headlight bulb pigtails with new ones and say gaad-bye to corrosion, erosion, etc. H.D. plastic plug with color coded 10ga. wire makes these about the best quality there is for this item and that should brighten up your day!
  
01-16-2102-0 H.D. 3-PRONG HEADLIGHT PIGTAIL/ CONNECTOR, each  $  3.95

Chrome Off-Road Lights

Great looks and added night vision make these lights a must on any Baja or Buggy. Your choice of 4" with  55 watt bulb or 5" & 6", complete with 100 Watt bulbs and mounting hardware.
  
01-16-9150-0 4inch CHROME OFF ROAD LIGHT, each  $   18.95
01-00-9309-0 5inch CHROME OFF ROAD LIGHT, each  $   21.95
01-00-9310-0 6inch CHROME OFF ROAD LIGHT, each  $   24.95

Soft Covers For Off-Road Lights

Using these black vinyl covers for both 5" & 6" Empi off-road lights helps you keep from breaking the glass lenses during your daytime fun runs.
  
01-16-9145-0 5inch PLAIN COVERS FOR OFF ROAD LIGHT, pair  $  11.95
01-16-9146-0 5inch "EYES" COVERS FOR OFF ROAD LIGHT, pair  $  12.95
  
01-16-9148-0 6inch "EYES" COVERS FOR OFF ROAD LIGHT, pair  $   12.95

Baja Light Bar

 

Steel tube light bar installs 4 lights on any Bug. Bolt-On installation - requires NO welding! Includes hardware.
  
01-00-9312-0 BAJA LIGHT BAR (RAW)

 $    33.95*


Heavy Duty Off-Road Tail Lights

Great for all Sandrails, Buggies and Baja Bugs. Chromed heavy duty cast aluminum bodies for good looks and durability.
  
01-00-9497-0 H. D. OFF-ROAD TAIL LIGHT, RED LENS, pair $ 20.95

Off-Road Tail Light Covers

Now you can even give your tail lights the Billet look! Chrome steel bolt-on covers go right over the existing lens on the H.D. Off-Road Tail Lights and provide a great new look for a minimal amount of work.
  
01-00-9498-0 OFF-ROAD TAIL LIGHT COVER,   pair $   13.95

Roll Bar Padding

Offset hole location allows padding to be positioned to provide more protection for driver/passengers. Comes in Pre-cut 3 foot lengths with 1 1/2" I.D.
  
01-16-2090-0 ROLL BAR PAD, 3' LONG, YELLOW, PACK OF 10   $  60.95
01-16-2090-1 ROLL BAR PAD, 3' LONG, YELLOW, EACH   $    6.95
01-16-2092-0 ROLL BAR PAD, 3' LONG, BLUE, PACK OF 10   $  60.95
01-16-2092-1 ROLL BAR PAD, 3' LONG, BLUE, EACH   $    6.95
01-16-2094-0 ROLL BAR PAD, 3' LONG, PURPLE, PACK OF 10   $  60.95
01-16-2094-1 ROLL BAR PAD, 3' LONG, PURPLE, EACH   $    6.95
01-16-2096-0 ROLL BAR PAD, 3' LONG, BLACK, PACK OF 10   $  60.95
01-16-2096-1 ROLL BAR PAD, 3' LONG, BLACK, EACH   $    6.95

Gas Cover

   

Use the flange w/flush screw-in cover for access to internal fuel fillers. Made of high impact black plastic. Mounts on flat surfaces.

  
01-16-6032-0 FLUSH MOUNT ACCESS FLANGE & COVER  $   11.95

Flip-Top Fuel Filler

   

This polished aluminum Fuel Filler Cap features a spring action top with a spring-loaded latch. Quick action for fast fueling…and never worry about losing your gas cap. Perfect for Buggies or Baja's, it is vented and features a convenient mounting flange. Fits any 2” opening.

  
01-16-6033-0 FLIP TOP FUEL FILLER CAP WITH 2" OPENING  $ 34.95