|
|
|
|
New
Direct Drilled Crankshaft |
|
|
Direct
drilled crankshafts force the oil in one direction for better full flow
lubrication. Cranks are New standard/standard with stock 69mm
stroke. |
|
|
|
|
| 01-98-1510-B |
NEW 69MM STROKE DIRECT
DRILLED CRANKSHAFT |
$
175.95 |
 |
|
|
|
4130 Chromoly Crankshaft |
|
|
The heart of any hi-performance engine
is the crankshaft. Counter-weighted crankshafts greatly reduce power
robbing and damaging crank-flex, high RPM harmonics and vibration through
the entire power range. Empi's Counter-Weighted Crankshafts are perfect
for the racer on a budget. These cranks are precision ground,
micro-polished, nitrided and balanced. Features include: forged from 4140
chromoly, radiused standard/standard journals, chamfered oil holes, 8
dowel, 8mm dowel pins and cross-drilled. Available in stock 69mm stroke or
74mm stroker versions. |
|
|
|
|
| 01-00-8120-0 |
69mm
COUNTER-WEIGHTED CRANKSHAFT |
$
265.95 |
|
| 01-00-8121-0 |
74mm
COUNTER-WEIGHTED CRANKSHAFT |
$
265.95 |
|
|
|
|
4340 Chromoly Stroker
Crankshaft |
|
|
EMPI has developed this high
quality counter-weighted stroker crank with the serious racer in mind.
Multiple die stamp forged from 4340 chromoly (one of the strongest
materials available for crankshafts). Cranks are then magna fluxed, shot
peened and all journals are nitrided, precision ground and micro polished.
Additional features include cross drilled, chamfered oil holes, dynamic
balancing, 8 dowel and extra long 8mm dowel pins. |
|
|
|
|
| 01-00-8180-0 |
76mm
STROKER COUNTER-WEIGHTED CRANKSHAFT, VW JOURNALS |
$
288.95 |
|
| 01-00-8181-0 |
78mm
STROKER COUNTER-WEIGHTED CRANKSHAFT, VW JOURNALS |
$
288.95 |
|
| 01-00-8182-0 |
82mm
STROKER COUNTER-WEIGHTED CRANKSHAFT, VW JOURNALS |
$
288.95 |
|
|
|
|
|
| 01-00-8185-0 |
76mm
STROKER COUNTER-WEIGHTED CRANKSHAFT, CHEVY JOURNALS |
$
288.95 |
|
| 01-00-8186-0 |
78mm
STROKER COUNTER-WEIGHTED CRANKSHAFT, CHEVY JOURNALS |
$
288.95 |
|
| 01-00-8187-0 |
82mm
STROKER COUNTER-WEIGHTED CRANKSHAFT, CHEVY JOURNALS |
$
288.95 |
|
| 01-00-8188-0 |
84mm
STROKER COUNTER-WEIGHTED CRANKSHAFT, CHEVY JOURNALS |
$
288.95 |
|
|
|
|
Volkstroker III Crankshafts |
|
|
These
New cast counterweighted, 8 dowel pin crankshafts eliminate engine
vibrations and bearing wear. Maximum performance up to 5,500 RPM/130hp |
|
|
|
|
| 02-10692 |
NEW SCAT VOLKSTROKER III
C/W CAST CRANK 69mm X VW |
$
182.95 |
|
| 02-10782 |
NEW SCAT VOLKSTROKER III
C/W CAST CRANK 78mm X VW |
$
280.95 |
|
|
|
|
Volksracer Forged Cranks |
|
|
Made
from the finest virgin 4340 Chromoly billets and ground to exact sizes,
magnafluxed, dynamically balanced and micro-polished. 8 dowel pins drilled
and grooved main journals for superior oil flow. Nitrided for added
strength. |
|
|
|
|
| 02-101372-1 |
SCAT
VOLKSRACER 4340 FORGED CRANK, 69XVW T1, EACH |
$
349.95 |
|
| 02-101398-1 |
SCAT VOLKSRACER 4340 FORGED CRANK,
78.8XVW T1, EACH |
$
475.95 |
|
| 02-101402-1 |
SCAT VOLKSRACER 4340 FORGED CRANK, 82XVW
T1, EACH |
$
475.95 |
|
| 02-101404-1 |
SCAT VOLKSRACER 4340 FORGED CRANK,
82XCHEVY T1, EACH |
$
580.95 |
|
| 02-101412-1 |
SCAT VOLKSRACER 4340 FORGED CRANK, 84XVW
T1, EACH |
$
475.95 |
|
| 02-101414-1 |
SCAT VOLKSRACER 4340 FORGED CRANK,
84XCHEVY T1, EACH |
$
580.95 |
|
|
|
|
Pro-Comp Forged Cranks |
|
|
Manufactured from the finest
virgin 4340 Chromoly billets and ground to exact sizes, magnafluxed,
dynamically balanced and micro-polished. 8 vanadium dowel pins installed-
.400" longer then stock. Straight shot oil system and grooved main journals
for superior oil flow. Nitrided for added strength. |
|
|
|
|
| 02-8-74-2111D |
SCAT PRO COMP 4340 BILLET CRANK, 74mm
STROKE, VW T-1, NITRIDED |
$
1271.95 |
|
| 02-8-78-2111D |
SCAT PRO COMP 4340 BILLET CRANK, 78mm
STROKE, VW T-1, NITRIDED |
$
1271.95 |
|
| 02-8-82-2111D |
SCAT PRO COMP 4340 BILLET CRANK, 82mm
STROKE, VW T-1, NITRIDED |
$
1271.95 |
|
| 02-8-82-4111D |
SCAT PRO COMP 4340 BILLET CRANK, 82mm
STROKE, CHEVY T-1, NITRIDED |
$
1271.95 |
|
| 02-8-84-2111D |
SCAT PRO COMP 4340 BILLET CRANK, 84mm
STROKE, VW T-1, NITRIDED |
$
1271.95 |
|
| 02-8-84-4111D |
SCAT PRO COMP 4340 BILLET CRANK, 84mm
STROKE, CHEVY T-1, NITRIDED |
$
1271.95 |
|
|
|
|
Crankshaft
Hardware |
|
|
The Crank Shaft Installation kit includes
new timing gear, distributor drive gear, distributor drive pinion, oil
slinger, retaining clip and woodruff keys. For
use with all type 1 crankshafts. Replace worn or faulty parts with these
quality components. |
|
|
|
|
|
01-00-8105-0 |
CRANKSHAFT INSTALLATION KIT,
1200-1600cc |
$
78.95 |
|
|
01-98-1520-B |
CRANKSHAFT TIMING GEAR,
1200-1600cc |
$
28.95 |
|
|
01-98-1523-B |
DISTRIBUTOR DRIVE GEAR,
1200-1600cc |
$
22.95 |
|
|
01-98-1531-B |
DISTRIBUTOR DRIVE
PINION, EACH |
$ 53.95 |
|
|
01-98-1532-B |
DISTRIBUTOR DRIVE GEAR
WASHER, .06mm, EACH |
$ .95 |
|
|
01-98-0115-B |
DISTRIBUTOR DRIVE
PINION SPRING, EACH |
$ .95 |
|
|
01-98-1541-B |
OIL SLINGER, 1200-1600cc |
$ 1.95 |
|
|
01-98-1527-B |
RETAINING CLIP, 1200-1600cc |
$ 1.95 |
|
|
01-98-1521-B |
TIMING GEAR WOODRUFF KEY,
1200-1600cc |
$
2.95 |
|
|
01-98-1549-B |
CRANK PULLEY WOODRUFF KEY,
1200-1600cc |
$
2.95 |
|
|
|
|
Performance Crankshaft
Gear Spacer |
|
|
Gear spacer failure can be a costly
event. The stock spacer was never intended to survive the stress of
today's high output engines. This Performance Spacer replaces the stock
unit with a solid ring of safety for your gear train. |
|
|
|
|
|
01-16-9522-0 |
PERFORMANCE CRANKSHAFT
GEAR SPACER |
$
10.95 |
|
|
|
|
Crankshaft
Dowel Pins |
|
|
Chrome
vanadium crankshaft dowel pins are heat treated for maximum strength
& precision ground to exact tolerances. |
|
|
|
|
|
01-00-8140-0 |
8mm EX LONG DOWEL PINS,
SET OF 8 |
$
16.95 |
|
|
01-00-8141-0 |
11/32 EX LONG DOWEL PINS,
SET OF 8 |
$
16.95 |
|
|
01-00-8142-0 |
8 DOWEL GASKETS, 10 PACK |
$
4.95 |
|
|
|
|
Flywheel Shims |
|
|
Set end play with these new flywheel
shims. |
|
|
|
|
| 98-1277-B |
FLYWHEEL SHIM,
.24mm, EACH |
$
1.95 |
|
| 98-1278-B |
FLYWHEEL SHIM,
.30mm, EACH |
$
1.95 |
|
| 98-1280-B |
FLYWHEEL SHIM,
.34mm, EACH |
$
1.95 |
|
| 98-1281-B |
FLYWHEEL SHIM,
.36mm, EACH |
$
1.95 |
|
| 98-1282-B |
FLYWHEEL SHIM,
.38mm, EACH |
$
1.95 |
|
|
|
|
VW
Engine Seals |
|
|
High quality silicone
flywheel seal is resistant to failure due to extreme temperature.
|
|
|
|
|
|
01-32-1545-B |
SILICONE OIL
SEAL, FLYWHEEL |
$
3.95 |
|
| 01-32-1546-0 |
ELRING SILICONE OIL SEAL,
FLYWHEEL |
$
5.95 |
|
|
01-98-0150-B |
FLYWHEEL SEAL,
1.7-2.0 L, TYPE 4 ENGINE |
$
5.95 |
|
|
|
|
Flywheels |
|
|
Replace
those old worn-out flywheels with these New high grade steel flywheels.
The lightweight 13lbs. version is drilled for standard 8 dowel pins.
Precision ground to insure quick smooth clutch action. |
|
|
|
|
| 98-1273-B |
FLYWHEEL, STOCK
STYLE, 200mm, 4 DOWEL PIN |
$
88.95 |
|
| 98-1275-B |
FLYWHEEL,
LIGHTENED, 8 DOWEL PIN, 200mm |
$
112.95 |
|
|
|
|
|
|
98-1283-B |
O-RING SEAL VW FLYWHEEL,
EACH |
$ 1.95 |
|
|
|
|
Chromoly
Racing Flywheels |
|
|
This Chromoly version of our lightened flywheel is the answer for anyone
looking for the ultimate in durability under extreme conditions. Only
available as 12 volt 200mm (130 teeth) O-ring style. |
|
|
|
|
|
01-00-4099-0 |
CHROMOLY
FLYWHEEL, 13lb, 12V - 200MM, EACH |
$
152.95 |
|
|
01-00-4100-0 |
CHROMOLY
FLYWHEEL, 13lb, for 11/32" DOWEL PINS12V - 200MM, EACH |
$
108.95 |
|
|
|
|
|
|
98-1283-B |
O-RING SEAL VW FLYWHEEL,
EACH |
$ 1.95 |
|
|
|
|
Chromoly
Flywheels |
|
|
The
Scat Chromoly 12.5 lbs. new forged steel & iron flywheels are drilled
for SPG offset pattern 8 dowel pins. clutch face is precision ground to
insure quick smooth clutch action |
|
|
|
|
| 02-60007 |
SCAT
NEW 12.5 LB 12V - 200MM CHROMOLY 4340 FLYWHEEL, EACH |
$
161.95 |
|
| 02-60063 |
FLYWHEEL 12V - 200MM FLANGE
CRANK - USA BILLET, EACH |
$
307.95 |
|
| 02-60064 |
FLYWHEEL 12V - 200 J&G
TO 8 DOWEL CRANK - USA BILLET, EACH |
$
210.95 |
|
| 02-60067 |
FLYWHEEL 12 -200 J&G TO
FLANGE CRANK - USA BILLET, EACH |
$
307.95 |
|
|
|
|
|
|
98-1283-B |
O-RING SEAL VW FLYWHEEL,
EACH |
$ 1.95 |
|
|
|
|
Gland
Nut & Washer |
|
|
These
heavy duty gland nut set includes a heavy duty washer for extra load
capacity and increased torque capabilities. |
|
|
|
|
| 01-00-4029-B |
GLAND NUT ONLY, EACH |
$ 10.95 |
|
| 01-00-4029-0 |
GLAND NUT & WASHER SET |
$ 13.95 |
|
|
01-00-4030-0 |
WASHER ONLY FOR GLAND NUT |
$ 4.95 |
|
|
|
|
Chromoly Gland
Nut & Washer |
|
|
Don't take a chance on stock gland nuts
in high performance applications. This ultra strong bad boy is made from
4130 chromoly. The extra strength chromoly and concave spring steel washer
provide maximum holding power. Fitted with special pre-greased needle
bearing and grease seal. Compatible with stock 4 dowel pin and 8 dowel pin
flywheels and features a 36mm nut size |
|
|
|
|
| 01-00-4026-0 |
PERFORMANCE 4130 CHROMOLY GLAND NUT & WASHER SET |
$ 23.95 |
|
|
|
|
Chromoly
Gland Nut & Washer |
|
|
These
4340 Chromoly billet are heat treated for maximum strength. Can be
torque
to 350 lbs without fear of breakage or stretch |
|
|
|
|
| 02-60025 |
SCAT 4340 CHROMOLY GLAND NUT
& WASHER (H.T.), SET |
$
26.95 |
|
| 02-60026 |
SCAT 4340 GLAND NUT
(+.250in) ASSY & WASHER (H.T.), SET |
$
31.95 |
|
 
|
