|
|
![]() |
|
|
Performance Pushrods |
|
|
|
Resists flexing at high RPM's under the loads of high lift cams and heavy valve spring pressures. A must with any dual spring application. Made from the highest quality heat-treated 5/16" steel tubing, ends are pre-installed and push rods are 11.078" overall length. Fits 1300-1600+cc. |
![]() |
|
|
Chromoly Pushrods |
|
|
|
Chromoly push rods are lighter and stronger then regular steel push rods. The 3/8" tubing offers maximum strength to maintain no flex operation at higher RPM's under the stress of high lift cams and high-rev. valve springs. Available in stock length fully assembled or custom Cut-to-Length style. |
| 01-00-4034-0 | EMPI, CHROMOLY 3/8 RODS, UNCUT, 8 | $ 46.95 |
|
| 01-00-4035-0 | EMPI, CHROMOLY 3/8 RODS, STOCK LENGTH, 8 | $ 46.95 |
|
|
|
![]() |
|
|
Aluminum Pushrods |
|
|
|
Lightweight strong 3/8” diameter push rods for the discerning engine builder. These units offer the ultimate in strength versus weight. Available in uncut lengths, to suit your individual application. Easily cut & installed in any VW engine. |
|
|
![]() |
|
|
Hi-Performance Pushrods |
|
|
|
Heat treated of highest quality tubing for use with VW adjustable rockers. Unique design insures no flex operation thru entire RPM range. Available in a variety of sizes for any installation. |
|
|
![]() |
|
|
Chromoly Pushrods |
|
|
|
Made from 4130 chromoly steel. Both pushrod tubes and ends are designed to withstand the demands of high RPM and heavy spring loads. 3/8” diameter resists flex to prevent damage to other valve-train components. When buying pushrods be sure it’s chromoly, not just steel. Available in various lengths. |
|
|
![]() |
|
|
Pro-Street Pushrods |
|
|
|
PRO STREET HEAT-TREATED CUT TO LENGTH & FIXED 5/16" STEEL PUSHRODS Assembled for 1300-1600cc or Cut To Length 11.500" length for use with longer stroke engines. Economically Priced + Light-Weight + Durable |
| 02-20020 | .3125" DIA. FIXED STEEL PUSHRODS 1300-1600cc, 8 | $ 26.95 |
|
| 02-20068 | PRO-STREET CUT TO LENGTH .3125" DIA. STEEL PUSHRODS 11.500", 8 | $ 32.95 |
|
|
|
|
|
|
|
Chromoly Pushrods |
|
|
|
MANTON HI-REV™4140 CHROMOLY CUT TO LENGTH 3/8" “SEAMLESS PUSHRODS” Heat treated extended steel tips assure proper seating in both lifter and rocker arm bore cups and will not wear out while under extreme conditions. 11.500" (292.1mm) long – must be cut to length. Dry Oil Coating Protects Contact Surfaces |
| 02-20172 | MANTON, 3/8 X .058" WALL CHROMOLY PUSHRODS, UNCUT, 8 | $ 81.95 |
|
| 02-20173 | MANTON, 3/8 X .035" WALL CHROMOLY PUSHRODS, UNCUT, 8 | $ 81.95 |
|
|
|
![]() |
|
|
Adjustable Push Rod Tubes |
|
|
|
Change damaged or leaking push rod tubes in minutes without removing the engine or heads. The center o-ring seal stops oil leaks. Made from heavy duty aluminum for strength and anodized for good looks. Fits 1200 to 1600cc |
|
|
![]() |
|
|
Hi-Performance Alum. Push Rod Tubes |
|
|
|
These billet aluminum machine finish push rod tubes have been designed to the specific requirements of high performance engine building. Features include two piece spring tensioned tubing that expands and contracts with engine, dual viton o-ring seals between the tubes, stock type end seals, plus have an inner diameter of 7/8" at the head end for maximum push rod clearance. |
| 01-00-4108-0 | EMPI HI-PERFORMANCE ALUM PUSH ROD TUBE, EACH | $ 8.95 |
|
| 01-00-4109-0 | EMPI HI-PERFORMANCE ALUM PUSH ROD TUBE, SET OF 8 | $ 61.95 |
|
|
|
![]() |
|
|
Aluminum Quick Change Pushrod Tubes |
|
|
|
The spring loaded design also allows you to quickly change damaged or leaking pushing rod tubes with in engine in the car. The heavy duty spring keeps a constant tension for a positive seal. Made from heavy duty aluminum for strength and fully blue anodized for good looks. Fits 1200 to 1600cc |
| 01-00-9095-0 | QUICK-CHANGE SPRING ALUM. PUSH ROD TUBE W/ SEALS, EA. | $ 8.95 |
|
| 01-00-9096-0 | QUICK-CHANGE SPRING ALUM. PUSH ROD TUBES W/ SEALS, SET (8) | $ 57.95 |
|
|
|
![]() |
|
|
Nylon Self-Adjusting Push Rod Tubes |
|
|
|
The heat resistant high impact design nylon is an economical alternative to the aluminum self-adjusting push rod tube and offers the same benefits( Black). Fits 1200 to 1600cc |
|
|
![]() |
|
|
Adjustable "Gold" Push Rod Tubes |
|
|
|
ADJUSTABLE DOUBLE O-RING SEALED SOLID GOLD ALUMINUM PUSHROD TUBES POSITIVE SEALING FOR TYPE-1 Internal spring – Gold Anodized finish make them smooth & attractive. Double O-Ring and Tube End seals to leak-proof installations. May be removed in minutes for quick pushrod replacement without having to remove cylinder head. |
| 02-20175 | ADJUSTABLE GOLD PUSHROD TUBES, SET OF 8 | $ 52.95 |
|
| 02-20174 | ADJUSTABLE GOLD PUSHROD TUBE, SINGLE REPLACEMENT, EACH | $ 8.95 |
|
|
|
![]() |
|
|
Stainless Steel Push Rod Tubes |
|
|
|
No rust or corrosion with Empi stainless steel push rod tubes. The stainless steel windage push rod tubes extend further into the case to prevent oil from over filling the valve covers. Fits 1300 to 1600cc |
| 01-00-8520-0 | STAINLESS PUSH-ROD TUBE, EA. | $ 4.95 |
|
| 01-00-8521-0 | STAINLESS PUSH-ROD TUBE (8) | $ 34.95 |
|
| 01-00-8531-0 | S/S WINDAGE TUBE (8) | $ 35.95 |
|
| 01-00-8530-0 | S/S WINDAGE TUBE, EA. | $ 5.95 |
|
|
|
![]() |
|
|
H/D Stock Style Push Rod Tubes |
|
|
|
Made out of heavier steel then stock push rod tubes. Fits 1300 to 1600cc |
|
|
![]() |
|
|
Push Rod Tube Seals |
|
|
|
Choose from high temperature silicone or stock replacement seals. Each Set contains 16 seals. |
|
|
![]() |
|
|
Push Rod Tube Protectors |
|
|
|
Protect your push rod tubes from rocks and debris with these chrome-plated steel pushrod tube protectors |
|
|
