|
 |
|
High-Ratio Rockers |
|
 |
True quality shines through on these
FORGED hi-lift ratio rocker arms. Everything was covered in the design and
manufacturing. Available in either 1.25 or 1.4 ratio to satisfy all
applications. Units come complete with Chromoly studs and mounting blocks.
Also features Chromoly steel shafts. A great performance engine addition
when using a special Hi Lift cam or just using a stock cam. This kit is
top quality and you won’t be disappointed. |
|
|
|
|
|
BP-4019-20 |
HI-LIFT ROCKER ARM KIT,
1.25 RATIO, PAIR |
$
125.95 |
 |
|
BP-4019-21 |
HI-LIFT ROCKER ARM KIT,
1.40 RATIO, PAIR |
$
125.95 |
|
 |
|
Pro-Street Rockers |
|
|
These Pro-street forged
rocker assemblies are made by Scat. The 1.25 rockers are made of 4140
chromoly. Comes with arms, shafts mounts, swivel adjusting screws, pads
& shims.
|
|
|
|
|
| 02-20130 |
1:1 FORGED ROCKER ARM
ASSEMBLY |
$
130.95 |
|
| 02-20188S |
1:25 FRGD ROCKER ARM ASSY
W/SWIVEL ADJ SCREWS - HI LIFT, SET |
$
162.95 |
|
|
|
|
Pro-Comp Rockers |
|
|
These Pro-Comp forged rocker
assemblies are made by Scat. The billet 4340 rockers shafts are 50%
stronger the needle bearing types & the forged rockers have flame
hardened tips. Assemblies come with forged arms, billet shafts, mounting
blocks, chromoly mounting studs, adjusting screws & lash caps.
|
|
|
|
|
| 02-20196 |
SCAT 1.25 FORGED ROCKER ASSY
T-1 - HI LIFT, SET |
$
292.95 |
|
| 02-20195 |
SCAT 1.4 FORGED ROCKER ASSY
T-1 - HI LIFT, SET |
$
292.95 |
|
 |
|
1.25 Rocker
Arms |
|
 
|
An easy and inexpensive way to get
more power and acceleration from any 1200-1600cc engine. No special
modifications are needed, the 1.25's work with stock rocker shafts, push
rods and adjusters or with our high performance shafts and swivel foot
adjusters. The 1.25 Rocker Arms will not affect cam duration, bottom end
performance or reliability and can be run with stock carburetors. They are
quick and easy to install.
|
|
|
|
|
| 01-21-2312-0 |
1.25 RATIO ROCKER ARMS
ONLY, SET OF 8 |
$
82.95 |
|
| 01-21-2313-0 |
O.E. TYPE VALVE ADJUSTING
SCREW/NUT KIT, SET OF 8 |
$ 15.95 |
|
|
|
|
Chromoly Rocker
Arms |
|
|
Chromoly forged rocker arms
are made by Scat with a .707" I.D. The Pro-Comp rocker arms
have a .765" I.D.
|
|
|
|
|
| 02-20188SA |
1:25 FRGD ROCKER ARM W/SWIVEL
ADJ SCREWS (8 PCS) - HI LIFT, SET |
$ 130.95 |
|
| 02-20195-1 |
SCAT 1.4 FORGED ROCKER ARM
FOR PRO-COMP ASSEMBLIES T-1 - HI LIFT, EA |
$
32.95 |
|
| 02-20196-1 |
SCAT 1.25 FORGED ROCKER ARM
FOR PRO-COMP ASSEMBLIES T-1 - HI LIFT, EA |
$
32.95 |
|
|
|
|
High Performance Rocker Shaft |
|
|
Increase the RPM potential of your
engine and get more power. Empi's rocker shaft kits help to eliminate
rocker shaft side play that causes rocker arm galling, clip and washer
failure. Includes precision ground high strength shafts, with solid steel
center spacer and shims. All necessary hardware is included. Best when
used with EMPI's swivel foot adjusters.
|
|
|
|
|
| 01-21-2309-0 |
EMPI
HI-PERFORMANCE/HI-STRENGTH ROCKER SHAFT KIT |
$ 41.95 |
|
|
|
|
High Performance Rocker Shaft |
|
|
Increase the RPM potential of your
engine and get more power. Empi's rocker shaft kits help to eliminate
rocker shaft side play that causes rocker arm galling, clip and washer
failure. Includes precision ground high strength shafts, with a floating
aluminum center spacer which allows for "fine tuning" of rocker arm
geometry and positioning. All necessary hardware is included. Best when
used with EMPI's swivel foot adjusters.
|
|
|
|
|
| 01-21-2308-0 |
EMPI HI-PERFORMANCE ROCKER
SHAFT KIT w/FLOATING CENTER SPACER |
$ 41.95 |
|
|
|
|
Performance Rocker Shaft |
|
|
When using standard VW rocker arms in
hi-performance engines there sometimes occurs rocker arm galling, clip and
washer breakage. These problems are overcome by installing this assembly.
More power becomes available due to positive rocker arm to valve
alignment. Adjustment screw life is extended, especially when swivel feet
are used.
|
|
|
|
|
|
BP-4049 |
BUGPACK ROCKER SHAFT KIT, VW
T-1 |
$
63.95 |
|
|
|
|
Performance Rocker Shaft |
|
|
These dry oil coated Billet
4140 forged rocker shafts are made by Scat and fit standard or forged
rocker arms with .707 I.D. Comes with 6061-T6 center spacer and end
cap, shims & hardware.
|
|
|
|
|
| 02-20129 |
BOLT-ON ROCKER SHAFT VW T-1 |
$
42.95 |
|
|
|
|
Chromoly
Rocker Studs |
|
|
Chromoly
Rocker Studs are superior in strength to stock studs. A must have for high
performance heads with dual valve springs. Installs without modification
in Type 1/2/3 1500-1600cc based heads. sold in sets of 4.
|
|
|
|
|
|
01-21-2314-0 |
CHROMOLY ROCKER STUD, set of
4 |
$
15.95 |
|
|
|
|
Chromoly
Rocker Studs |
|
|
Replace your stock rocker studs
with race quality chromoly rocker studs. Features a .100” Longer length
necessary when adjusting rocker arm geometry with pedestal shims. |
|
|
|
|
|
BP-4041 |
BUGPACK CHROMOLY ROCKER STUD, set of
4 |
$
26.95 |
|
|
|
|
Ball
Foot Swivel Valve Adjusters |
|
|
Prevents valve stem wear
caused by side load of high lift cams and valve spring pressure. Features
slotted screw head design. Each kit includes rocker stand shims for
correct height adjustment.
|
|
|
|
|
| 01-00-4061-0 |
HI-PERFORMANCE SWIVEL FEET (8) |
$ 23.95 |
|
|
|
|
H/D Performance Swivel
Valve Adjusters |
|
|
Empi Heavy Duty Performance Swivel
Feet Adjusters feature a large foot print that covers the valve stem to
reduce the chance of mushrooming and side load friction. Contact areas are
precision ground and hardened. Features slotted screw head design. Kit is
complete with rocker boss shims to insure correct rocker arm geometry.
|
|
|
|
|
| 01-21-2031-0 |
H.D. SWIVEL HEAD VALVE
ADJUSTERS, SET OF 8 |
$ 28.95 |
|
|
|
|
"Elephant Foot" Swivel
Valve Adjusters |
|
|
These Elephant Foot style of
valve adjusters are what were originally supplied on the 911 Porsche
engines. These are precision made units and come complete with shims for
setting up the rocker geometry correctly. Kit includes eight swivel foot
adjusters and multiple sets of varying thickness shims.
|
|
|
|
|
|
BP-4010-10 |
ELEPHANT FOOT VALVE
ADJUSTERS, set of 8 |
$
37.95 |
|
|
|
|
Rocker Arm
Stand Shims |
|
|
For use in obtaining correct
rocker arm geometry when using cylinder spacers, different length pushrods
and swivel adjusting screws.
|
|
|
|
|
| 01-21-2315-0 |
ROCKER
STAND SHIMS 015, 4 PIECES |
$ 3.95 |
|
| 01-21-2330-0 |
ROCKER
STAND SHIMS 030, 4 PIECES |
$ 3.95 |
|
| 01-21-2360-0 |
ROCKER
STAND SHIMS 060, 4 PIECES |
$ 3.95 |
|
|
|
|
|
| 01-21-2310-0 |
ROCKER STAND SHIMS
KIT, 12 PIECES |
$ 7.95 |
|
|
|
|
Rocker
Shaft Shims |
|
|
Replace the wave washers on the
stock rocker shaft set-up. Eliminates excess side play and maintains
proper valve train geometry. Each kit contains 8 shims and is available in
4 sizes (thickness).
|
|
|
|
|
| 01-00-4058-0 |
ROCKER ARM SHIMS .010 (8) |
$ 4.95 |
|
| 01-00-4055-0 |
ROCKER ARM SHIMS .015 (8) |
$ 4.95 |
|
| 01-00-4056-0 |
ROCKER ARM SHIMS .030 (8) |
$ 4.95 |
|
| 01-00-4057-0 |
ROCKER ARM SHIMS .060 (8) |
$ 4.95 |
|
 
|
