|
|
 |
|
|
48 IDA Pro Velocity Stacks |
|
|
|
Empi's spun aluminum pro stacks use a race proven design to maximize airflow and velocity. Designed to mount just like the originals with no modifications of the carburetor required. NOT compatible with Empi's King Kong air cleaners. |
| 01-43-6057-0 | 48 IDA PRO VELOCITY STACKS , PR. | $ 32.95 |
 |
|
|
|
|
|
|
Chrome Velocity Stacks |
|
|
|
These chrome stacks or "Air Horns" aid in prevention of fuel stand-off and look great. Fits all IDF Weber and DRLA Dellorto carbs. Three sizes are available to aid in matching to proper air cleaner applications. All stacks are steel with high quality chrome finish. |
| 01-43-6050-0 | IDF CHROME VELOCITY STACKS, 2-1/2" , PR. | $ 17.95 |
|
| 01-43-6054-0 | IDF CHROME VELOCITY STACKS, 4" , PR. | $ 21.95 |
|
| 01-43-6056-0 | IDF CHROME VELOCITY STACKS, 6" , PR. | $ 24.95 |
|
|
|
|
|
|
|
Velocity Stacks Covers |
|
|
|
High quality molded vinyl caps snap over carburetor velocity stacks to protect from unwanted debris or water from entering the carburetor when the vehicle is not being operated.. |
| 01-43-5720-0 | VELOCITY STACK COVERS, FOR IDF CARB., PAIR | $ 15.95 |
|
| 01-43-5721-0 | VELOCITY STACK COVERS, FOR 48 IDA CARB., PAIR ( will not fit pro velocity stacks) | $ 15.95 |
|
|
|
|
|
|
|
Coil Relocation Kit |
|
|
|
Relocating the coil from the fan housing is necessary when you install dual carburetors on up-right engines. This engineered kit allows you to tuck the coil neatly out of the way, without modification. Complete with zinc plated bracket and mounting hardware. |
| 01-43-5204-0 | COIL RELOCATION KIT | $ 6.95 |
|
|
|
|
|
|
|
Carburetor Synchronizers |
|
|
|
Proper synchronization of dual carburetor set-ups is essential for peak performance. Accurately dial in your carbs with one of these carburetor synchronizers. |
| 01-43-5712-0 | EMPI UNIVERSAL PRO-SYNC, w/ 2 ADAPTORS | $ 41.95 |
|
| 01-00-5746-0 | SU TYPE CARBURETOR SYNCHRONIZER | $ 16.95 |
|
|
|
|
|
|
|
HPMX & IDF Chock Block-off Plate |
|
|
|
Use this zinc plated blockoff plate when you remove the "stock" choke assembly from IDF carburetors.. |
| 01-43-5709-0 | IDF CHOCK BLOCKOFF PLATE | $ 3.95 |
|
|
|
|
|
|
|
Solex 40mm Service Items |
|
|
|
Replacement parts for the Empi Brosol / Solex 40mm carburetor. |
| 01-43-4402-0 | REPLACEMENT BRASS FUEL FITTING "T", EACH | $ 4.95 |
|
| 01-43-4403-0 | REPLACEMENT FLOAT, PLASTIC, EACH | $ 13.95 |
|
| 01-43-4405-0 | REPLACEMENT CARB. BASE THROTTLE ASSEMBLY, EACH | $ 45.95 |
|
|
|
|
|
|
|
Stock Carburetor Replacement Parts |
|
|
|
Replacement parts for the stock 30 PICT, 31 PICT and 34 PICT |
| 01-98-1293-B | ADAPTOR KIT, 30/31 TO 34 PICT | $ 18.95 |
|
| 01-98-1294-B | IDLE CUT-OFF VALVE, 12 VOLT/G52.5 | $ 23.95 |
|
| 01-98-1295-B | IDLE CUT-OFF VALVE, 12 VOLT/G55 | $ 19.95 |
|
| 01-98-1296-B | IDLE CUT-OFF VALVE, 12 VOLT/G45 | $ 20.95 |
|
| 01-98-1297-B | AIR BY-PASS VALVE w/PLUNGER, 12 VOLT | $ 20.95 |
|
|
|
|
|
|
|
Intake Manifold Gaskets |
|
|
|
Made with premium gasket material and cut to fit your application. |
| 01-00-3250-0 | DUAL PORT GASKETS, for EMPI DUAL 40mm, PAIR | $ 1.95 |
|
| 01-00-3252-0 | HPMX CARB CASTING GASKET, PAIR | $ 5.95 |
|
| 01-00-3397-0 | DUAL PORT MAIN GASKETS, PAIR | $ 1.95 |
|
| 01-00-3251-0 | DUAL PORT GASKETS WITH OUT PINHOLES, PAIR | $ 1.95 |
|
| 01-00-3227-0 | TYPE 2 & 4 1.7-2.0L 3 & 4 BOLT GASKETS, PAIR | $ 2.95 |
|
| 01-00-3225-0 | DUAL PORT MAIN GASKETS for EMPI'S 48 IDA'S MANIFOLDS, PAIR | $ 2.95 |
|
|
|
|
|
|
|
Carburetor Base Gaskets |
|
|
|
Made with premium gasket material and cut to fit your application. |
| 01-00-3253-0 | 34 PICT-3 BASE GASKET, PAIR | $ 3.95 |
|
| 01-00-3254-0 | 30 PICT-1 BASE GASKET, PAIR | $ 3.95 |
|
| 01-00-3396-0 | 40-44 IDF/48 IDA GASKETS, PAIR | $ 1.95 |
|
| 01-00-3278-0 | WEBER 40/42-DCNF GASKET, PAIR | $ 1.95 |
|
| 01-00-3315-0 | 40-44 IDF WEBER, DELLORTO 36/40-DRLA GASKETS, PAIR | $ 1.95 |
|
| 01-00-3316-0 | WEBER 34 ICT GASKETS, PAIR | $ 1.95 |
|
| 01-00-3399-0 | HOLLEY BUG SPRAY/ZENITH GASKETS (2) | $ 1.95 |
|
| 01-00-3409-0 | HOLLEY/WEBER DFV GASKETS, ISOLATED TYPE, PAIR | $ 1.95 |
|
| 01-00-3410-0 | HOLLEY/WEBER DFV GASKETS, PLENUM TYPE, PAIR | $ 1.95 |
|
| 01-00-3234-0 | EMPI SOLEX/BROSOL 40 EIS (KADRON) GASKET, PAIR | $ 1.95 |
|
|
|
|
|
|
|
Air Filter Base Gaskets |
|
|
|
Made with premium gasket material and cut to fit your application. |
| 01-00-3210-0 | WEBER IDF AIR CLEANER GASKET, PAIR | $ 1.95 |
|
| 01-00-3211-0 | WEBER DFV/HOLLEY AIR CLEANER GASKET, PAIR | $ 1.95 |
|
| 01-00-3212-0 | WEBER DCNF AIR CLEANER GASKET, PAIR | $ 1.95 |
|
| 01-00-3213-0 | WEBER DCOE AIR CLEANER GASKET, PAIR | $ 1.95 |
|
| 01-00-3214-0 | WEBER DGV AIR CLEANER GASKET, PAIR | $ 1.95 |
|
| 01-00-3220-0 | 48 IDA AIR CLEANER BASE GASKET w/ VELOCITY STACK SPACERS, PAIR | $ 5.95 |
|
|
|
|
|
|
|
Type 3 Deck Lid Bubble |
|
|
|
The deck lid bubble for type 3 is necessary to provide proper carburetor clearance when running the progressive Weber carb kit. |
| 01-43-2125-0 | TYPE 3, REPLACEMENT DECK LID BUBBLE | $ 22.95 |
|
|
|
|
|
|
|
Air Intake Boot |
|
|
|
Here is the hard to find Air Intake Boot for Fuel Injected type 1 models.. |
| 01-98-1298-B | AIR INTAKE BOOT | $ 47.95 |
|
|
|
|
|
|
|
Extra Clearance Nuts |
|
|
|
11mm outside diameter nuts may be used on intake and exhaust for extra clearance. Made from Brass to resist rust and avoid seized threads. |
| 01-43-6051-0 | INTAKE / EXHAUST NUTS W/ SMALL OUTSIDE DIAMETER (8) | $ 5.95 |
|
|
|
|
|
|
|
Nylon Air Cleaner Fitting |
|
|
|
Universal 90 Degree nylon fitting for connecting that breather line to your air cleaner. |
| 01-00-8998-0 | UNIV. 90+ NYLON FITTING WITH NYLON NUT | $ 1.95 |
|
|
|
 |
 |
 |
