|
 |
|
Empi
Heavy Duty Oil Pumps |
|
.JPG) |
The gears on the Empi H.D. Oil Pump
are 38% larger then stock pumps; providing increased oil pressure, oil
flow, volume and lower oil temperature. Made from cast iron and
precision machined for a distortion free fit. |
|
|
|
|
| 01-31-2925-0 |
EMPI H.D. OIL
PUMP 8MM, 1600cc, w/ DISH CAM GEAR |
$
31.95 |
 |
| 01-31-2935-0 |
EMPI H.D. OIL PUMP 8MM,
1300-1500cc, w/ FLAT CAM GEAR |
$ 31.95 |
|
 |
|
Melling H.D. Oil Pumps |
|
.JPG)
|
The Melling H.D. Oil Pump is made from
cast iron and has gears that are 38% larger than stock. Genuine Melling |
|
|
|
|
| 01-31-2955-0 |
8MM OIL PUMP MELLING,
1300-1500cc, 67-70, w/ FLAT CAM GEAR |
$
116.95 |
|
| 01-31-2901-0 |
6MM OIL PUMP MELLING,
1200-1300cc, 61-66 |
$ 121.95 |
|
|
|
|
Stock
Style H.D. Oil Pumps |
 |
For stock and moderate
hi-performance engines. Oil volume is increased by 25% (40% with the H.D.
pump). Made from cast aluminum and machined to exacting tolerances.
Pumps are supplied without covers, use P/N 01-00-9148-7 cover. All pumps
are for 8mm studs.
|
|
|
|
|
|
01-98-1159-B |
H.D. OIL PUMP, w/ DISH CAM,
30mm GEARS, 1600cc 71 ON |
$ 33.95 |
|
|
01-98-1158-B |
H.P. OIL PUMP, w/ FLAT CAM,
30mm GEARS, 1500-1600cc thru 70 |
$ 34.95 |
|
|
|
|
|
| 01-00-9148-7 |
OIL PUMP COVER ONLY, STOCK
STYLE |
$
4.95 |
|
|
|
|
Full
Flow Filter Pumps |
|
.JPG)
|
These high capacity pumps provide
added oil pressure, increased oil volume and cooling. The filter cleans
the oil 100% of the time. Kit includes filter and all necessary
hardware. (will not fit
with stock muffler)
|
|
|
|
|
| 01-00-9206-0 |
PUMP W/ FILTER,
1300-1600cc, THRU 70, w/ FLAT CAM GEAR |
$ 71.95 |
|
| 01-00-9206-7 |
PUMP ONLY, 1300-1600cc,
THRU 70, w/ FLAT CAM GEAR |
$ 66.95 |
|
| 01-00-9207-0 |
PUMP W/ FILTER, 1600cc, 71
ON, w/ DISH CAM GEAR |
$
71.95 |
|
| 01-00-9207-7 |
PUMP ONLY, 1600cc, 71 ON,
w/ DISH CAM GEAR |
$
66.95 |
|
|
|
|
|
| 01-00-9208-0 |
REPLACEMENT OIL FILTER |
$ 7.95 |
|
| 01-00-9286-0 |
REPLACEMENT 6mm MOUNTING BOLTS (SET
OF 4) |
$
2.95 |
|
| 01-00-9287-0 |
REPLACEMENT 8mm MOUNTING BOLTS (SET
OF 4) |
$ 2.95 |
|
|
01-00-9207-5 |
REPLACEMENT GASKET BETWEEN
COVER AND PUMP, EACH |
$ 1.95 |
|
|
01-00-9207-4 |
REPLACEMENT GASKET BETWEEN
PUMP AND CASE, EACH |
$ 1.95 |
|
|
|
|
Inlet/Outlet Oil Pump |
|
 |
Add a conventional oil filter to your engine with
this 31.9mm oil pump. Has 1/4" NPT tapped inlet & outlet. |
|
|
|
|
|
01-16-9702-0 |
FILTER FLOW OIL PUMP, THRU
-70 for FLAT CAM GEAR, EACH |
$ 58.95 |
|
|
01-16-9713-0 |
FILTER FLOW OIL PUMP, 71 &
LATER for DISH CAM GEAR, EACH |
$ 58.95 |
|
|
|
|
|
|
01-00-9215-0 |
1/4" MALE NPT w/ 1/2" HOSE
BARB, PACK of 2 |
$ 4.95 |
|
|
|
|
Empi
Premium Oil Pump Cover |
|
.JPG)
|
Improved design increases pulley
and sheet metal clearance issues. Precision machined from high grade
cast iron, with a high quality finish and ground gear/gasket surface,
this is the best pump cover available. All Empi pump covers are threaded
3/8" NPT and supplied with a 1/2" hose fitting. For 8mm stud use only.
|
|
|
|
|
| 01-31-2940-0 |
HIGH GRADE OIL PUMP
COVER w/ FITTING |
$ 21.95 |
|
|
|
|
Billet
Aluminum Oil Pump Covers |
|
.JPG)
|
With everything else being made from
6061-T1 aluminum it was only natural to offer our 8mm oil pump covers like
that. These are available for both full flow and stock style applications.
Fitting and gasket included.
|
|
|
|
|
| 01-31-2942-0 |
BILLET ALUM. OIL PUMP
COVER, 8mm, FULL FLOW |
$ 25.95 |
|
| 01-31-2943-0 |
BILLET ALUM. OIL PUMP
COVER, 8mm, w/o FULL FLOW |
$ 12.95 |
|
|
|
|
Oil
Pump Covers |
|
.JPG)
|
Our precision fit oil pump covers are
made with a threaded boss for use with full flow filter or cooler. Fits
all VW pumps with 8mm bolt holes. The stock style cover is made of steel
and has 8mm bolt holes. |
|
|
|
|
| 01-00-9148-7 |
OIL PUMP COVER ONLY, STOCK
STYLE |
$ 4.95 |
|
| 01-00-9226-0 |
OIL PUMP COVER W/ FITTING (ALUMINUM) |
$ 11.95 |
|
|
14-115126 |
OIL PUMP COVER ONLY, (STEEL) |
$ 16.95 |
|
|
|
|
Full Flow Remote Filter
Kit |
|
.JPG) |
Everything you need to install a full flow remote
oil filter system. This bolt-on kit requires no machining or engine
removal. Includes pump cover, remote filter bracket, oil return adaptor,
fittings, hose & hardware. (Oil pump NOT included) |
|
|
|
|
|
01-00-9252-0 |
FULL FLOW KIT/BOLT-ON |
$ 97.95 |
|
|
|
|
Oil Return Adaptor Kit |
|
 |
Designed to add a full flow oil system without
machining the engine case. Screws into the rear oil by-pass galley
(spring and plunger must be removed) and provides the return route for
oil from a full flow pump cover. Installs without engine removal. |
|
|
|
|
|
01-16-9517-0 |
OIL RETURN ADAPTOR, EACH |
$ 59.95 |
|
|
|
|
Billet Full Flow Hose
Brackets |
|
 |
Keep oil lines in check while maintaining that
billet look. Bolts on at exhaust flange and helps protect oil lines from
engine and exhaust. Fits up-to 3/4" O.D. hoes. |
|
|
|
|
|
01-17-2810-0 |
BILLET F/F OIL LINE
BRACKET, POLISHED, EACH |
$ 34.95 |
|
|
01-17-2809-0 |
BILLET F/F OIL LINE
BRACKET, BLACK, EACH |
$ 34.95 |
|
 
|
