|
|
|
High Capacity Oil Sump |
|
|
|
Increase oil supply and prevent oil starvation by adding 1-1/2 quart of oil capacity with Empi's High Capacity Oil Sump. The cast finned design also increases cooling. Includes all necessary hardware and 3 sizes of pickup tubes for all 1200-1600cc engine types. |
| 01-00-9142-0 | HIGH CAPACITY 1 1/2" QUARTS OIL SUMP | $ 67.95 |
 |
|
|
|
Empi Super Capacity Oil Sump |
|
|
|
Oil takes a lot of abuse in an air-cooled engine. It has to provide both lubrication and cooling functions, therefore any type of performance upgrade or demanding driving requires additional oil capacity. Empi's slim line sump increases oil capacity by 3.5 quarts without loss of ground clearance associated with other super capacity sumps. Includes all necessary hardware and 3 sizes of pickup tubes for all 1200-1600cc engine types. |
| 01-00-9143-0 | HIGH CAPACITY 3 1/2" QUARTS OIL SUMP | $ 127.95 |
|
|
|
|
Billet Oil Sump Plate Kit |
|
 |
This Billet Aluminum Oil Sump Plate will never bend or distort due to over-tightening., thus causing dangerous leaks like stock plates, and it also adds a custom look to any engine. CNC machined from high-grade aluminum billet. Includes chrome magnetic drain plug, special cap nuts and gasket kit for trouble free installation. |
| 01-16-8964-0 | BILLET OIL SUMP PLATE KIT | $ 22.95 |
|
| BP-3051-10 | MINI SUMP KIT , ALL T-1 | $ 27.95 |
|
| BP-3058 | SUPER OIL SUCTION KIT | $ 45.95 |
|
|
|
|
Chrome Sump Plate/Magnetic Drain Plug |
|
|
|
High quality Chrome Oil Sump Plate. Available with or without standard drain plug. Magnetic Drain Plug help keep your oil free from metal bits and shavings. Includes sealing washer |
| 01-00-8964-0 | CHROME OIL SUMP PLATE W/ CHROME DRAIN PLUG | $ 7.95 |
|
| 01-00-8911-0 | CHROME SUMP PLATE ONLY | $ 5.95 |
|
| 01-00-8856-0 | CHROME MAGNETIC DRAIN PLUG | $ 2.95 |
|
|
|
|
Oil Screen Kit / Oil Change Gasket Kit |
|
|
|
Extend the life of your engine by replacing this screen with each and
every oil change. Complete with gaskets and copper washers. The Oil Change Gasket Kit comes with enough to do 2 complete oil changes. Includes gaskets and copper washers. |
| 01-00-9923-0 | OIL SCREEN KIT, 1200-1300cc | $ 5.95 |
|
| 01-00-9924-0 | OIL SCREEN KIT, 1500-1600cc | $ 4.95 |
|
| 01-98-1160-0 | OIL SCREEN KIT, 1500-1600cc, 68-69 | $ 5.95 |
|
| 01-00-9909-0 | OIL CHANGE GASKET SET (2) | $ 1.95 |
|
|
|
|
Smooth-Flow Oil Filler |
|
|
|
A new design for an oil item. These oil filler have a nice smooth look along with a low profile smooth cap or grooved cap design. The filler body and caps are made from 6061 T-6 and fully polished to a show car shine! Supplied with 1/2" hose fitting so breather line hookup is easy. |
| 01-00-7904-0 | BILLET OIL FILLER w/ SMOOTH CAP & w/VENT | $ 23.95 |
|
| 01-00-7902-0 | BILLET OIL FILLER w/ GROOVED CAP & w/VENT | $ 21.95 |
|
|
|
|
Vertical Oil Filler |
|
|
|
Tired of oil spilling all over when you try to add it to your motor? This new design makes it much easier to pour the oil into your motor. Made from fully polished 6061 T-6 billet aluminum it's just the thing to finish off a good looking engine compartment. Supplied with 1/2" hose fitting so breather line hookup is easy. |
| 01-00-7912-0 | BILLET OIL FILLER, VERTICAL FILLER w/ GROOVED CAP & w/VENT | $ 28.95 |
|
| 01-00-7914-0 | BILLET OIL FILLER, VERTICAL FILLER w/ SMOOTH CAP & w/VENT | $ 28.95 |
|
|
|
|
Billet Oil Caps |
|
|
|
The caps only for the filler above can also be purchased separately. Choose from the new smooth flow look with knurled edges or for an easy grip go with the grooved style cap. Both caps fit all Empi threaded filler tubes as well as most other aluminum filler tubes with screw on caps. |
| 01-00-8899-0 | BILLET ALUMINUM OIL FILLER CAP w/ GROOVES | $ 13.95 |
|
| 01-00-7905-0 | BILLET SMOOTH OIL FILLER CAP | $ 13.95 |
|
|
|
|
Vented Oil Filler Tube w/ Screw-on Cap |
|
|
|
Replaces stock type oil filler assembly with turned aluminum filler with high impact plastic cap. |
| 01-00-8904-0 | POLISHED OIL FILLER TUBE EXTEN., W/ SCREW-ON CAP VENTED | $ 10.95 |
|
| 01-00-8904-7 | REPLACEMENT SCREW ON OIL CAP ONLY | $ 2.95 |
|
| 01-00-8901-5 | REPLACEMENT VENT FITTING FOR OIL FILLER TUBES, EA. | $ 1.95 |
|
| 01-00-8899-0 | BILLET OIL FILLER CAP | $ 13.95 |
|
|
|
|
Oil Filler Tubes |
|
|
|
Extends oil filler for ease of maintenance. Dresses up your engine with a brilliant polished finish. Available with or without vent fitting. |
| 01-00-8900-0 | POLISHED OIL FILLER TUBE EXTEN., W/ PUSH-ON CAP | $ 8.95 |
|
| 01-00-8901-0 | POLISHED, VENTED OIL FILLER EXTEN. W/ PUSH-ON CAP | $ 10.95 |
|
| 01-00-8900-7 | REPLACEMENT PUSH ON OIL CAP ONLY | $ 2.95 |
|
| 01-00-8901-5 | REPLACEMENT VENT FITTING FOR OIL FILLER TUBES, EA. | $ 1.95 |
|
|
|
|
Chrome Oil Filler & Cap |
|
|
|
Replace stock oil filler and cap with these high quality chrome parts. |
| 01-00-8965-0 | CHROME OIL FILLER W/ TUBE & CAP, SET | $ 8.95 |
|
| 01-00-8966-0 | CHROME OIL FILLER W/ TUBE | $ 6.95 |
|
| 01-00-8968-0 | CHROME STOCK OIL CAP | $ 2.95 |
|
|
|
|
Chrome Oil Cap |
|
|
|
All high quality chrome. |
| 01-00-8968-0 | CHROME STOCK OIL CAP | $ 2.95 |
|
|
|
|
Oil Dipstick Adapter/Type 3 Block-off Kit |
|
|
|
The Oil Dipstick Adapter converts Type 3 cases and Universal cases which have not been machined for dipstick tube. The Type 3 Block-Off Kit is used on late style cases and type 3 cases to block off oil fill opening to convert to upright applications. |
| 01-00-8932-0 | OIL DIPSTICK ADAPTER W/ GASKET | $ 5.95 |
|
| 01-00-8931-0 | LATE CASE,TYPE-3 DIPSTICK BLOCK-OFF W/ GASKET, (ALUM.) | $ 3.95 |
|
| 01-98-1170-0 | BLOCK-OFF PLATE, DIPSTICK HOLE, TYPE 3 | $ 3.95 |
|
| 01-98-1171-0 | BLOCK-OFF PLATE, DIPSTICK HOLE w/ 1/8" NPT TAPPED HOLE | $ 4.95 |
|
|
|
|
VW Style Dip Sticks |
|
|
|
These VW style dipstick available in stock to longer handles or chrome to billet handles. All dipsticks are designed to fit both stock and aftermarket cases. |
| 01-98-1162-B | STOCK DIP STICK, 1200-1600cc | $ 3.95 |
|
| 01-00-9054-0 | CHROME DIP STICK, STOCK LENGTH | $ 3.95 |
|
| 01-00-9075-0 | LONG REACH HANDLE, CHROMED DIP STICK | $ 4.95 |
|
| 01-00-8500-0 | ALUMINUM DIP STICK | $ 9.95 |
|
|
|
|
Oil Pressure Booster Kit |
|
|
|
Specially designed larger piston and stronger spring increase oil pressure throughout the system. A must when installing an oil cooler or remote filter. |
| 01-00-9201-0 | OIL PRESSURE BOOSTER KIT - 69& EARLIER - SINGLE | $ 2.95 |
|
| 01-00-9202-0 | OIL PRESSURE BOOSTER KIT- 70 ON - DUAL | $ 3.95 |
|
|
|
|
Adjustable Oil Pressure Regulator |
|
|
|
Allows you to adjust the oil pressure with the twist of a wrench. Use with stock pressure regulator spring. |
| 01-00-9198-0 | OIL PRESSURE REGULATOR ADJUSTMENT KIT | $ 6.95 |
|
|
|
|
Oil Pressure Switch |
|
|
|
This is one of the least expensive - most important parts of your engine. Don't hope your old switch is working - be sure with a new switch. |
| 01-98-9190-0 | OIL PRESSURE SWITCH, FOR STOCK INDICATOR LIGHT | $ 2.95 |
|
|
|
|
Cast Aluminum Oil Breather Kit |
|
|
|
Reduce crankcase pressure, eliminate blow-by and oil loss. High revving modified engines require more crankcase ventilation than the stock breather can supply. With the Empi Aluminum Oil Breather Kit the blow-by oil is collected in the foam filter and the air vapors are vented to the atmosphere. New features include the Empi logo cast in the top. improved heavy duty breather hose, plus internal changer that includes a screen mesh shelf to elevate the foam filter element. |
| 01-00-8544-0 | COMPLETE ENGINE OIL BREATHER KIT, (CAST ALUMINUM) | $ 26.95 |
|
| 01-00-9242-0 | REPLACEMENT HOSE FOR CAST ALUM. BREATHER | $ 9.95 |
|
|
|
|
Valve Cover Vents |
|
|
|
Decrease crankcase pressure, eliminate blow-by and reduce oil loss with these easy to install Valve Cover Vents. Features Empi's Sure-O-Ring seal system. Vent into air cleaner or breather box. |
| 01-00-9164-0 | VALVE COVER VENTS, PAIR | $ 4.95 |
|
|
|
|
Breather Filters |
|
|
|
Gauze element breather with Chrome Top and off-set 1/2" hole for oil filler, or Chrome Top and Bottom with centered 1/2" hole. |
| 01-00-9053-0 | GAUZE OIL FILLER BREATHER AIR CLEANER | $ 7.95 |
|
| 01-00-9052-0 | GAUZE BREATHER FILTER, SHIELDED | $ 7.95 |
|
|
|
|
Cast Aluminum Oil Breather Kit |
|
|
|
Empi's Billet polished canister type breather box features high quality all aluminum construction with removable lid for easy servicing of the foam element, provision for up to four breather lines and a split type mounting clamps that makes installation as easy as tightening two screws. Washable foam insert separates oil from vapors while keeping out dust and dirt. Vapors are released from vents under the cap. |
| 01-16-7030-0 | POLISHED ALUM. VENTED BREATHER BOX, 1-1/2" TUBE MOUNT | $ 80.95 |
|
|
|
|
Cast Aluminum Oil Breather Kit |
|
|
|
Designed for maximum breathing filtration. The chrome steel tower design returns the blow-by oil to the engine while the high capacity gauze filter with spun aluminum top cover keeps dirt out during deceleration. |
| 01-00-8540-0 | BREATHER TOWER W/ TOP | $ 41.95 |
|
| 01-00-8541-0 | REPL. FILTER FOR BREATHER TOWER | $ 17.95 |
|
|
|
|
Billet Breather Tubes |
|
|
|
Function and form. Finish off your sand rail with these Polished Billet Breather Tubes. Available with colored Empi covers or with chrome shielded covers. |
| 01-16-5153-0 | BILLET BREATHER TUBE,W/ SHIELDED FILTER COVERS | $ 48.95 |
|
| 01-16-2049-0 | BILLET BREATHER TUBE,W/ BLUE FILTER COVERS | $ 64.95 |
|
| 01-16-2050-0 | BILLET BREATHER TUBE,W/ RED FILTER COVERS | $ 64.95 |
|
| 01-16-5151-0 | REPLACEMENT FILTER FOR BREATHER TUBES W/ SHIELDED FILTER COVERS | $ 10.95 |
|
| 01-16-5152-0 | REPLACEMENT FILTER FOR BREATHER TUBES | $ 7.95 |
|
|
|
 |
 |
 |
