|
|
|
2 Seat L/T Mid-Engine Chassis |
|
|
|
Mid-Engine, 2 seat chassis are made of 1 1/2" .095 DOM tubing with 1 1/4" .083 lacing. Approx. 113" wheel base with 20" front and rear travel. Comes with Front A-arms with heavy duty Rod Ends, Grade 8 Hardware, Front Spindles, Tie Rods, End Load Steering Rack and Dual Pivot Rear Arm and Bushing set up to accept micro stub. (Chassis doesn't include rims and tires, shocks, radiator, trans, motor or steering wheel as shown in picture. $1500.00 nonrefundable deposit require on chassis. Turn around time is approx. 6 to 9 weeks from deposit to completion. Balance due at completion.) |
|||
| MF-ME2 | 2 SEAT MID-ENGINE CHASSIS, DEPOSIT ONLY $1500.00 | $ 7500.00** |
 |
| MF-MOLY | CHROMOLY 4130 GRADE TUBING UPGRADE | $ 650.00** |
|
| MF-TAB | TABBED CAR OPTION, SEATS, BELTS, PEDALS, GAR BARS, FOOT REST, TRANS TABS INSTALLED | $ 325.00** |
|
|
** SHIPPED VIA TRUCK FREIGHT F.O.B. See " Shipping" for rates |
|||
|
|
|
4 Seat Long Travel Chassis |
 |
| Heavy Duty 4 seat chassis are made of 1 1/2" .095 DOM tubing with 1 1/4" .083 lacing. Approx. 128" wheel base with 20" front and rear travel. Comes with Front A-arms with heavy duty Rod Ends, Grade 8 Hardware, Front Spindles, Tie Rods, End Load Steering Rack and Dual Pivot Rear Arm and Bushing set up to accept micro stub. ($1500.00 nonrefundable deposit require on chassis. Turn around time is approx. 6 to 9 weeks from deposit to completion. Balance due at completion.) | |||
| MF-HR-1 | 4 SEAT LONG TRAVEL CHASSIS, DEPOSIT ONLY $1500.00 | $ 7950.00** |
|
| MF-MOLY | CHROMOLY 4130 GRADE TUBING UPGRADE | $ 650.00** |
|
| MF-TAB | TABBED CAR OPTION, SEATS, BELTS, PEDALS, GAR BARS, FOOT REST, TRANS TABS INSTALLED | $ 325.00** |
|
|
** SHIPPED VIA TRUCK FREIGHT F.O.B. See " Shipping" for rates |
|||
|
|
|
2 Seat BIG BOY Chassis |
|
|
|
The all new BIG BOY chassis has been redesigned to provide more then enough room to install any type of seating while still maintaining a proven 101" long wheelbase. Chassis is made of 1 1/2" mild steel tubing with 1" tube bracing. |
| BP-5501-60 | 2 SEAT " BIG BOY " KIT, LINKPIN FRONT | $ 568.95** |
|
| BP-5501-61X | 2 SEAT " BIG BOY " WELDED WITH TORSION, LINKPIN FRONT | $ 1024.95** |
|
|
** SHIPPED VIA TRUCK FREIGHT F.O.B. See " Shipping" for rates |
|||
|
|
|
4 Seat BIG BOY Chassis |
|
|
|
The 4 seater has room for 4 adults accommodated by an even higher top profile and a much longer cage plus moving the front seating location forward. The wheel base is a full 111". Chassis is made of 1 1/2" mild steel tubing with 1" tube bracing. |
| BP-5501-50 | 4 SEAT " BIG BOY " KIT, LINKPIN FRONT | $ 711.95** |
|
| BP-5501-51X | 4 SEAT " BIG BOY " WELDED WITH TORSION, LINKPIN FRONT | $ 1186.95** |
|
|
** SHIPPED VIA TRUCK FREIGHT F.O.B. See " Shipping" for rates |
|||
|
|
|
Rail Front Bumper |
|
|
|
These front tube bumper fits all the BIG BOY chassis with link pin front end only |
| BP-5501-90 | " BIG BOY " FRONT BUMPER, PLAIN, FOR LINK PIN FRONT | $ 57.95 |
|
| BP-5501-91 | " BIG BOY " FRONT BUMPER, CHROME, FOR LINK PIN FRONT | $112.95 |
|
|
|
|
Chrome Grab Handles |
|
|
|
These weld-on Chrome grab handles are made from .050" x 1" tubing and the ends are radiuses for easy attachment to any tubing. |
| 14-750150C | GRAB HANDLE/ FOOTREST, 90 BENDS, CHROME | $ 9.95 |
|
| 14-750151C | GRAB HANDLE/ FOOTREST, 45 ANGLE CHROME | $ 9.95 |
|
|
|
|
Custom Torsion Housing |
  |
|
The custom torsion housing are precision jig fabricated to insure straightness. The torsion housing install kit will give you all the right pieces to install the custom torsion housing like they do at the factory. |
| BP-5519-10 | CUSTOM TORSION HOUSING, SWING AXLE | $ 181.95 |
|
| BP-5519-11 | CUSTOM TORSION HOUSING, IRS | $ 233.95 |
|
| BP-5519-17 | CUSTOM TORSION HOUSING, IRS CONVERSION CLIPS, PAIR | $ 57.95 |
|
| BP-5519-12 | TORSION HOUSING INSTALL KIT | $ 181.95 |
|
|
|
 |
 |
 |
