|
|
JT |
|
Aluminum
Beam Without Towers |
|
|
Genuine JT
Aluminum front beams are the Original aluminum beams since 1975. Made with
cast aluminum towers and available
with or without adjusters & comes with bushing.
Narrowed or extended widths available by
special order Great for sand rails or add the billet aluminum clamps to
fit stock VW pans (1948-1965) |
|
JT |
|
Aluminum Beam
With Towers |
|
 |
Genuine JT
Aluminum front beams are the Original aluminum beams since 1975. Made
with cast aluminum towers and available with or without adjusters
& comes with bushing. Narrowed or
extended widths available by special order Great for sand rails or add
the billet aluminum clamps to fit stock VW pans (1948-1965) |
|
|
|
|
|
JT-1018 |
JT ALUMINUM
AXLE BEAM WITH SHOCK TOWERS |
$ 174.95
|
 |
|
|
|
|
|
JT-1018A |
JT ALUMINUM
AXLE BEAM WITH SHOCK TOWERS & ADJUSTERS |
$ 230.95
|
|
|
|
|
|
|
JT-1018C |
BILLET ALUMINUM
AXLE BEAM CLAMPS FOR VW PANS |
$ 49.95
|
|
 |
|
Aluminum
Beam Without Towers |
|
|
Jamar's Aluminum front beams are the BEST
aluminum beams out there. Made with 100% billet aluminum end plates,
Jamar's beams are designed for heavy off road use and
custom looks. Comes with bushing.
MADE IN THE USA |
|
|
|
|
|
JAM-JBFBNT |
JAMAR ALUMINUM AXLE BEAM
WITHOUT SHOCK TOWERS |
$
169.95 |
|
|
|
|
Alum
Beam With Adjusters & w/o Towers |
|
|
Jamar's Aluminum front beams are the BEST
aluminum beams out there. Made with 100% billet aluminum end plates,
Jamar's beams are designed for heavy off road use and
custom looks. Comes with bushing.
MADE IN THE USA |
|
|
|
|
|
JAM-JBFBNTA |
JAMAR ALUMINUM AXLE BEAM
WITHOUT SHOCK TOWERS |
$
196.95 |
|
|
|
|
Aluminum Beam With Tower |
|
|
Jamar's Aluminum front beams are the BEST
aluminum beams out there. Made with 100% billet aluminum tower end plates,
Jamar's beams are designed for heavy off road use and
custom looks. Comes with bushing.
MADE IN THE USA |
|
|
|
|
|
JAM-JBFBT |
JAMAR ALUMINUM AXLE BEAM
WITH SHOCK TOWERS |
$
239.95 |
|
|
|
|
Alum
Beam With Adjusters & Towers |
|
|
Jamar's Aluminum front beams are the BEST
aluminum beams out there. Made with 100% billet aluminum tower end plates,
Jamar's beams are designed for heavy off road use and
custom looks. Comes with bushing.
MADE IN THE USA |
|
|
|
|
|
JAM-JBFBTA |
JAMAR ALUMINUM
AXLE BEAM WITH SHOCK TOWERS |
$
308.95 |
|
|
|
|
Steering Damper Mount |
|
 |
Clamps around the front
beam and makes attaching the steering damper easy. Works great on
aluminum front beams. |
|
|
|
|
| 14-750103 |
BILLET
STEERING DAMPER MOUNT |
$ 13.95 |
|
|
|
|
Warrior Axle Beam No Towers |
|
|
These
beams are for those looking for a heavy duty link pin beam and longer front wheel
travel. Beam
Bushing sold separate. |
|
|
|
|
|
14-401003 |
WARRIOR AXLE BEAM, 6'' WIDER,
NO TOWERS |
$
69.95 |
|
|
14-401004 |
WARRIOR AXLE BEAM, 6'' WIDER,
NO TOWERS, W/ ADJUSTERS |
$
104.95 |
|
|
|
|
Warrior Axle Beam with Towers |
|
|
These
beams are for those looking for a heavy duty link pin beam and longer front wheel
travel with 8" & 10" towers. Beam
Bushing sold separate. |
|
|
|
|
| 14-401005 |
WARRIOR
AXLE BEAM, STOCK WIDTH, 8" TOWERS |
$
182.95 |
|
| 14-401006 |
WARRIOR
AXLE BEAM, 6'' WIDER THAN STOCK, 8" TOWERS |
$
188.95 |
|
|
14-401007 |
WARRIOR
AXLE BEAM, 6'' WIDER THAN STOCK, 10" TOWERS |
$
194.95 |
|
|
|
|
Coil-Over Axle Beam |
|
|
When running coil-over shocks these beams are a must. Chromoly steel
tubing with towers for 10" travel shocks (Coil-over
beams do not have torsion adjusters) Beam Bushing sold separate. |
|
|
|
|
|
14-401010 |
COIL-OVER BEAM, 6'' WIDER FOR
10" TRAVEL SHOCKS |
$
183.95 |
|
 |
|
Tweeds Coil-Over Axle
Beam |
|
|
Tweeds 6 inch wider beams with 10 inch travel shock
towers can be used with coil-over or non-coil-over shocks. (Coil-over
beams do not have torsion adjusters). Beam Bushing sold separate. Rack
mount can be welded in place for zero bump steer for an extra $20.95
MADE IN THE USA |
|
|
|
|
|
AS-BEAM |
TWEEDS COIL-OVER BEAM w/ 10" TOWERS |
$
264.95 |
|
|
AS-RM-INSTALL |
ADD-ON RACK MOUNT w/ TWEEDS COIL-OVER
BEAM ONLY |
$
20.95 |
|
|
|
|
Urethane
Axle Beam Bushings |
|
|
The strength and durability of
Urethane will out-last and out-perform standard rubber products in every
application. Install Urethane and never look back! All bushings are red
in color |
|
|
|
|
|
14-413107 |
URETHANE ALUMINUM AXLE BEAM
BUSHINGS, 6'' LONG, EACH |
$
6.95 |
|
| 14-413108 |
URETHANE STEEL AXLE BEAM
BUSHINGS, 6'' LONG, EACH |
$
5.95 |
|
 |
|
Urethane
Axle Beam Bushings |
|
|
The strength and durability of
Urethane will out-last and out-perform standard rubber products in every
application. Install Urethane and never look back! All bushings are red
in color |
|
|
|
|
|
01-16-5143-0 |
URETHANE
AXLE BEAM BUSHING KIT, FOR ALUMINUM BEAM w/45mm TUBES, SET OF 4 |
$
23.95 |
|
|
01-16-5144-0 |
URETHANE
AXLE BEAM BUSHING KIT, FOR STEEL BEAM 2.000"/.120" WALL TUBES, SET OF 4 |
$
25.95 |
|
|
|
|
Long
Travel Tower Kit |
|
|
Warrior Tower kit fit stock king & link pin beams.
Gives your stock arms more travel by moving the shock mounting points (top
& bottom) so you can run longer shocks. Fabrication and welding required. |
|
|
|
|
|
01-16-4131-0 |
LONG
TRAVEL AXLE BEAM TOWER ONLY FOR KING PIN FRONT END, 8in TOWER, WELD-ON |
$
79.95 |
|
|
|
|
Front
End Adjusters |
|
|
For best results, install one on each
tube. Requires cutting & welding. |
|
|
|
|
| 01-22-2802-0 |
WELD-IN, FRONT TORSION BAR ADJUSTERS -LINK PIN,
EACH |
$ 12.95 |
|
| 01-22-2801-0 |
WELD-IN, FRONT TORSION BAR ADJUSTERS -BALL JOINT,
EACH |
$ 12.95 |
|
|
|
|
Off-Road
Torsion Arms |
|
|
These
trailing arms will give you more travel, wider stance and a smoother
ride, Can be attach with Thru Rod to the beam plus some sets can be
attach with torsion springs. |
|
|
|
|
| 14-413050 |
FORGED FRONT
TRAILING ARMS 1-1/2 X 3/4", FOR COIL-OVER SHOCKS, SET OF 4 |
$
223.95 |
|
| 14-414052 |
FORGED,
COIL-OVER FRONT TRAILING ARMS 2-1/2 X 1, RAW, SET OF 4 |
$
232.95 |
|
|
|
|
|
| 14-413051 |
CHROMOLY FRONT
TRAILING ARMS 2-1/2 X 1", SET OF 4 |
$
335.95 |
|
| 14-413053 |
CHROMOLY FRONT
TRAILING ARMS 4 X 1", SET OF 4 |
$
363.95 |
|
|
|
|
|
|
|
|
Tweeds Off-Road
Torsion Arms |
|
|
These
trailing arms will give you more travel, wider stance and a smoother
ride, Can be attach with Thru Rod to the beam plus some sets can be
attach with torsion springs.
MADE IN THE USA |
|
|
|
|
|
AS-245 |
TWEEDS 2-1/4" X 1" TORSION ARMS, SET |
$
329.95 |
|
|
|
|
Tweeds Off-Road
Coil-Over Arms |
|
|
These
trailing arms will give you more travel, wider stance and a smoother
ride, Can be attach with Thru Rod to the beam plus some sets can be
attach with torsion springs.
MADE IN THE USA |
|
|
|
|
|
AS-335 |
TWEEDS 2-1/4" X 1" COIL-OVER ARMS, SET |
$
310.95 |
|
|
AS-445 |
TWEEDS 4" X 1-1/2" COIL-OVER ARMS, SET |
$
359.95 |
|
|
|
|
Tweeds 1600 Racer Torsion Arms |
|
|
These
trailing arms are built for off-road racing in the stock classes. The
shock boss is located to give you max travel. These arms are made be
attached with torsion springs.
MADE IN THE USA |
|
|
|
|
|
AS-145 |
TWEEDS STOCK 1600 CLASS ARMS, SET |
$
329.95 |
|
|
|
|
|
|
|
|
Chromoly Combo Spindles |
|
|
These Forged King Pin Combo Spindles are a must have if you do any type of
Off-roading. Built with King pin bearings, not bushing like some others.
Works great with any longer front trailing arms.
Link pin bushing are sold separate. |
|
|
|
|
| 14-412030 |
FORGED KING PIN COMBO
SPINDLES / PAIR |
$
313.95 |
|
|
|
|
|
| 14-405055B |
5/8" LINK PIN BUSHING /
EACH |
$
7.95 |
|
| 14-405057B |
7/8" LINK PIN BUSHING /
EACH |
$
7.95 |
|
|
|
|
Tweeds Combo Spindles |
|
|
These
Tweed's King Pin Combo Spindles are a must have if you do any type of
Off-roading. Built in the USA. Works great with any longer front trailing
arms.
MADE IN THE USA |
|
|
|
|
|
AS-SB |
TWEEDS STD. COMBO SPINDLE WITH
INTERNATIONAL TIE ROD ENDS HOLES, PAIR |
$
464.95 |
|
|
AS-SH |
TWEEDS STD. COMBO SPINDLE WITH HEIM TIE
ROD ENDS HOLES, PAIR |
$
460.95 |
|
|
|
|
Tweeds 3" Lift Combo Spindles |
|
|
These
Tweed's King Pin Combo Spindles will give you an extra 3'' of lift for
more ground clearance and are a must have if you do any type of
Off-roading. Built in the USA. Works great with any longer front trailing
arms.
MADE IN THE USA |
|
|
|
|
|
AS-B |
TWEEDS 3" LIFTED COMBO SPINDLE WITH
INTERNATIONAL TIE ROD ENDS HOLES, PAIR |
$
495.95 |
|
|
AS-H |
TWEEDS 3" LIFTED COMBO SPINDLE
WITH HEIM TIE ROD ENDS HOLES, PAIR |
$
490.95 |
|
|
|
|
Heavy Duty Link-Pin
Carriers |
|
|
100% NEW Heavy Duty Link-Pin Carriers. Dropped forged and
comes with extra reinforcement to make them a great chose for the budget
off-roader. Sold
outright NO CORE CHARGE!!
|
|
|
|
|
| 14-412025 |
H/D LINK-PIN CARRIERS/ PAIR |
$
81.95 |
|
|
|
|
Heavy Duty Link-Pin
Spindles |
|
|
100% NEW Heavy Duty Link-Pin Spindles. Dropped forged and
comes with extra reinforcement on the steering arm to make them a great
chose for the budget off-roader. Sold
outright NO CORE CHARGE!!
|
|
|
|
|
| 14-412020 |
H/D LINK-PIN SPINDLES /
PAIR |
$
99.95 |
|
|
|
|
Link-Pin/King-Pin
Rebuild Kits |
 |
You can rebuild your worn-out link-pin / king-pin front ends easy with
these kits. Fits Type 1 bug Thru 1965.
|
|
|
|
|
| 01-98-2065-0 |
KING PIN REBUILD
KIT |
$
24.95 |
|
| 01-98-2066-0 |
LINK PIN REBUILD
KIT |
$
47.95 |
|
|
|
|
Tweeds Chromoly Link-Pins |
|
|
These
Tweeds Chromoly Link- Pin are a must have if you do any type of
Off-roading. Built in the USA. Works great with any longer front trailing
arms., but these are the only link-pin that works with Tweeds 3" Lifted
Spindles
MADE IN THE USA |
|
|
|
|
|
AS-LINKPIN |
TWEEDS CHROMOLY LINK PINS & LOCK NUTS,
SET OF 4 |
$
84.95 |
|
 |
|
Tough Link Pin Bushings |
|
|
A super tough aluminum bronze compound
allows these link pin bushings to out-last replacement type bushings 8 to
1
|
|
|
|
|
| BP-6592 |
TOUGH LINK PIN BUSHING, SET
OF 4 |
$
96.95 |
|
|
|
|
High Tensile Link Pins |
|
|
A set of link pins that you can count
on not to cause you a lot of down time as a result of broken parts. Made
of a super high tensile 300M material in a set of 4
|
|
|
|
|
| BP-6590 |
HIGH TENSILE LINK PIN,
STOCK TRAILING ARMS, SET OF 4 |
$133.95 |
|
|
|
|
Off-Road
Chromoly Link Pins |
|
|
These
4140 Chromoly link pins are design to go with the heavy duty off-road trailing arms
|
|
|
|
|
| 14-405055 |
5/8" CHROMOLY LINK PINS FOR
H/D TRAILING ARMS, EACH |
$
11.95 |
|
| 14-405057 |
7/8" CHROMOLY LINK PINS FOR
H/D TRAILING ARMS, EACH |
$
14.95 |
|
|
|
|
|
| 14-405055S |
5/8" LINK PIN SHIMS / EACH |
$
.95 |
|
| 14-405057S |
7/8" LINK PIN SHIMS / EACH |
$
1.95 |
|
|
|
|
Heavy Duty Link
Pins Bushing |
|
|
These
heavy duty link pins bushings are design to go with the Latest Rage
heavy duty spindle carriers and there combo spindles |
|
|
|
|
| 14-405055B |
5/8" LINK PIN BUSHING /
EACH |
$
7.95 |
|
| 14-405057B |
7/8" LINK PIN BUSHING /
EACH |
$
7.95 |
|
|
|
|
Spindle
Gusset Kit |
|
|
Beef-up
your stock link-pin spindles and carriers for some heavy duty off-roading. Must be welded on. |
|
|
|
|
| 01-00-3166-0 |
LINKPIN SPINDLE GUSSET KIT
(4) |
$ 13.95 |
|
|
|
|
Thru-Rods & Clamp
Nuts |
|
|
When running coil-over shocks, use the Thru-Rods
to get max travel out of your longer trailing arms.
|
|
|
|
|
|
14-401020 |
STOCK WIDTH BEAM THRU RODS, EACH |
$
9.95 |
|
| 14-401021-6 |
6in WIDER BEAM THRU RODS,
EACH |
$
9.95 |
|
|
14-401021N |
THRU RODS LOCKING NUT, EACH |
$
4.95 |
|
|
|
|
Front
Torsion Leafs |
|
|
New Heavy duty front torsion
leafs. Great for Baja Bugs and off road use.
|
|
|
|
|
|
14-413030 |
HEAVY DUTY FRONT LEAF
SPRINGS, L/P - 5 LEAF, STOCK WIDTH, SET |
$
104.95 |
|
|
14-413030W |
HEAVY DUTY FRONT LEAF
SPRINGS, L/P - 5 LEAF, 6" WIDER, SET |
$
160.95 |
|
|
|
|
Front
End Supports |
|
|
Help eliminate bent front beams with
these supports. Upper Supports bolt to beam and body while Lower
Supports bolt from beam to pan. Made from heavy wall steel tubing.
|
|
|
|
|
| 01-00-3842-0 |
H.D. LOWER F/END SUPPORT, PR. |
$
32.95 |
|
| 01-00-3843-0 |
H.D. UPPER F/END SUPPORT, PR. |
$
36.95 |
|
|
|
|
Front
End Clamps |
|
|
Mount a VW axle beam to a tube chassis
with our Front End Clamps. Made from heavy duty stamped steel. Use the
chrome plated clamps for that custom look or the raw version for
fabrication. Also can be used to mount Baja Tube Bumpers. |
|
|
|
|
| 01-00-3161-7 |
BULK FRONT END CLAMP, EACH |
$
2.95 |
|
| 01-00-3162-7 |
BULK CHROME FRONT END CLAMP,
EACH |
$
6.95 |
|
|
|
|
Ball Joint Raised Spindles |
|
|
Tweeds Ball Joint Raised spindles will raise
your vehicle 3 1/2" for more ground clearance and better ride. You still
use your stock ball joints, trailing arms & tie-rod ends. Set up for
drum brake. Disc brake caliper brackets sold separate
MADE IN THE USA
|
|
|
|
|
|
AS-BJ |
TWEEDS 3" LIFTED BALL JOINT SPINDLE WITH
CHROMOLY STUB, PAIR |
$
250.95 |
|
|
AS-CAL |
TWEEDS DISC BRAKE CALIPER MOUNTS, PAIR |
$
29.95 |
|
|
|
|
Ball Joint 3" Raised Spindles |
|
 |
Raise your bug or Baja 3" without sacrificing ride
quality with these heavy duty TIG welded spindles. Will work with 4-bolt
ball joint rotors. Uses late model ball joint bearings and seals. Left
spindle is drilled for speedo cable. NOT compatible with drum brakes. |
|
|
|
|
|
01-22-2974-0 |
3" RAISED SPINDLES FOR B/J
- PAIR |
$ 203.95 |
|
|
|
|
Clearance Ball
Joints |
|
|
Specially modified ball joints allows more
suspension travel for Baja Bugs
|
|
|
|
|
|
01-22-2820-0 |
UPPER
CLEARANCE BALL
JOINT, TYPE 1, 1966 ON, EACH |
$
11.95 |
|
|
01-22-2821-0 |
LOWER
CLEARANCE BALL
JOINT, TYPE 1, 1966 ON, EACH |
$
11.95 |
|
|
|
|
Shock
Mount Kit |
|
|
Lower shock extension (for link pin
only) will give your stock arms more travel by moving the shock mounting
point. Fabrication and welding required. |
|
|
|
|
|
01-16-4132-0 |
SHOCK
MOUNTING HARDWARE KIT FOR LINK-PIN FRONT |
$
14.95 |
|
|
