3x3 Trailing Arms

These 3X3 IRS trailing arms will give you tons of travel with all the strength you'll ever need for the heaviest off-roading. Takes type 1 bearings & stub axles.
14-530015E STANDARD REAR IRS TRAILING ARMS, 3X3, PAIR  $   235.95
14-530015 HEAVY DUTY REAR IRS TRAILING ARMS, 3X3, PAIR  $   288.95
14-530015CM CHROMOLY  REAR IRS TRAILING ARMS, 3X3, PAIR  $   434.95

3X3 Rear Arm Kit #1

The 3X3 Rear Arm kit #1 has all the components listed below

  • Pair of standard 3X3 boxed rear trailing arms

  • 2 Inner & 2 Outer bearings

  • 6 Bearing spacers

  • 2 Inner & 2 Outer seal kits

  • 2 bearing "C" clips

  • 2 bearing housing caps

  • 2 axle nuts

  • 2 stub axle with 930 cv flanges

  • 2 urethane pivot bushings

DPP-3X3KIT1 3X3 REAR TRAILING ARM KIT #1  $ 545.95**

3X3 Rear Arm Kit #2

The 3X3 Rear Arm kit #2 has all the components listed below

  • Pair of standard 3X3 boxed rear trailing arms

  • 2 Inner & 2 Outer bearings

  • 6 Bearing spacers

  • 2 Inner & 2 Outer seal kits

  • 2 Bearing "C" clips

  • 2 Bearing housing caps

  • 2 Axle nuts

  • 2 Stub axle with 930 cv flanges

  • 2 Transmission drive flanges

  • 2 Urethane pivot bushings

  • 4 930 off-road CV's joints

  • 4 930 off-road boot w/ flanges

  • 4 3/8-24 CV bolts

  • 4 CV grease packs

  • 2 Race axles

DPP-3X3KIT-T1 3X3 REAR TRAILING ARM & AXLE 20-1/4" KIT #2 WITH TYPE-1 TRANS DRIVE FLANGES  $ 1079.95**
DPP-3X3KIT-002 3X3 REAR TRAILING ARM & 19-1/4" AXLE KIT WITH 002 TRANS DRIVE FLANGES  $ 1079.95**
DPP-3X3KIT-091 3X3 REAR TRAILING ARM & 19-1/4" AXLE KIT WITH 091 TRANS DRIVE FLANGES  $ 1079.95**

3X3 Rear Arm Kit #3

The 3X3 Rear Arm kit #3 has all the components listed below

  • Pair of standard 3X3 boxed rear trailing arms

  • 2 Inner & 2 Outer bearings

  • 6 Bearing spacers

  • 2 Inner & 2 Outer seal kits

  • 2 Bearing "C" clips

  • 2 Bearing housing caps

  • 2 Axle nuts

  • 2 Stub axle with 930 cv flanges

  • 2 Transmission drive flanges

  • 2 Urethane pivot bushings

  • 4 930 off-road CV's joints

  • 4 930 off-road boot w/ flanges

  • 4 3/8-24 CV bolts

  • 4 CV grease packs

  • 2 Race axles

  • 2 Fox Emulsion shock w/ 12" of travel

DPP-3X3KIT-T1S 3X3 REAR TRAILING ARM & AXLE 20-1/4" KIT #2 WITH TYPE-1 TRANS DRIVE FLANGES & FOX EMULSION SHOCKS  $ 1450.95**
DPP-3X3KIT-002S 3X3 REAR TRAILING ARM & 19-1/4" AXLE KIT WITH 002 TRANS DRIVE FLANGES & FOX EMULSION SHOCKS  $ 1450.95**
DPP-3X3KIT-091S 3X3 REAR TRAILING ARM & 19-1/4" AXLE KIT WITH 091 TRANS DRIVE FLANGES & FOX EMULSION SHOCKS  $ 1450.95**

3X3 Rear Arm Kit #4

The 3X3 Rear Arm kit #4 has all the components listed below

  • Pair of standard 3X3 boxed rear trailing arms

  • 2 Inner & 2 Outer bearings

  • 6 Bearing spacers

  • 2 Inner & 2 Outer seal kits

  • 2 Bearing "C" clips

  • 2 Bearing housing caps

  • 2 Axle nuts

  • 2 Stub axle with 930 cv flanges

  • 2 Transmission drive flanges

  • 2 Urethane pivot bushings

  • 4 930 off-road CV's joints

  • 4 930 off-road boot w/ flanges

  • 4 3/8-24 CV bolts

  • 4 CV grease packs

  • 2 Race axles

  • 2 Fox coil-over shocks w/ 12" of travel & 4 coil springs

  • Pair of coil-over conversion plates w/ 3/4" heims & bolts

DPP-3X3KIT-T1CS 3X3 REAR TRAILING ARM & AXLE 20-1/4" KIT #2 WITH TYPE-1 TRANS DRIVE FLANGES & FOX COIL-OVER SHOCKS  $ 2145.95**
DPP-3X3KIT-002CS 3X3 REAR TRAILING ARM & 19-1/4" AXLE KIT WITH 002 TRANS DRIVE FLANGES & FOX COIL-OVER SHOCKS  $ 2145.95**
DPP-3X3KIT-091CS 3X3 REAR TRAILING ARM & 19-1/4" AXLE KIT WITH 091 TRANS DRIVE FLANGES & FOX COIL OVER SHOCKS  $ 2145.95**

Stock X 1" Trailing Arms

These stock width & 1" longer IRS trailing arms will give you all the strength you'll ever need for the heaviest off-roading. Takes type 1 bearings & stub axles.
14-530012E STANDARD REAR IRS TRAILING ARMS, STOCK WIDTH X 1" LONGER, PAIR  $   246.95
14-530012 HEAVY DUTY REAR IRS TRAILING ARMS, STOCK WIDTH X 1" LONGER, PAIR  $   281.95

Type-2 & 930's Race Axle Kits

This Axle & CV kit has everything you need all in one kit. The perfect kit for installing your 3x3 rear trailing arms
The kit comes complete with (2) 4340 Race Axles & Circlips, (4) Race Prep'ed CV's, (4) Off-Road Boots & Billet Steel Flanges, (24) CV Bolts, (4) Packs of Moly Grease and (8) Nylon Zip-Ties. 
01-16-2233-0 TYPE-2 AXLE KIT, 15-5/8" AXLES WITH 33 SPLINE, KIT $ 418.95
01-16-2232-0 TYPE-2 AXLE KIT, 19-1/4" AXLES WITH 33 SPLINE, KIT $ 418.95
01-16-2234-0 TYPE-2 AXLE KIT, 20-1/4" AXLES WITH 33 SPLINE, KIT $ 420.95
01-16-2235-0 930 AXLE KIT, 19-1/4" AXLES WITH 28 SPLINE, KIT $ 461.95
01-16-2236-0 930 AXLE KIT, 20-1/4" AXLES WITH 28 SPLINE, KIT $ 461.95
01-16-2238-0 930 AXLE KIT, 22" AXLES WITH 28 SPLINE, KIT $ 461.95
01-16-2239-0 930 AXLE KIT, 23" AXLES WITH 28 SPLINE, KIT $ 461.95

Heim Joint

These 3/4" heim joint are a perfect fit for the Spring Plate Conversion sets. Made with Chromoly Race and Teflon liner. (See all heim joints here)
14-425060R 3/4" X 3/4" CHROMOLY HEIM, RIGHT HAND THREAD, EACH  $  23.95
14-425060-JR 3/4"-16 JAM NUT, EACH  $   1.95

Urethane Rear Trailing Bushing

 

Install new or replace your old rubber bushings Urethane ones for better control and feeling car. 

01-16-5122-0 URETHANE I.R.S. A-ARM PIVOT BUSHINGS, PR.  $ 14.95

Spring Plates Conversion Set

The Spring Plate conversion set works with all IRS trailing arms to eliminate stock torsion springs so you can run a coil-over shock. When used with the 3x3 trailing arms it will give you tons of travel with all the strength that you'll ever need for the heaviest off-roading. (Needs Heim ends and bolts, sold separate) .
14-501360 SPRING PLATE CONVERSION SET FOR CUSTOM TORSION HOUSING/ STEEL / SET  $ 52.95
14-501360S S/S SPRING PLATE CONVERSION SET FOR CUSTOM TORSION HOUSING/ SET  $ 87.95
14-501361 SPRING PLATE CONVERSION SET FOR VW TORSION HOUSING/ STEEL / SET  $ 67.95
14-501361S S/S SPRING PLATE CONVERSION SET FOR VW TORSION HOUSING / SET  $ 95.95
14-501360B 3/4-16 BOLT FOR SPRING PLATE CAP TO HEIM/ EACH  $ 2.95

 

IRS Pivot Bolt w/Washers

New 17mm pivot bolt with washers .
CD-113-501-535A IRS PIVOT BOLT WITH 2 WASHERS, EACH  $ 14.95

IRS Box Kit

Strengthen your IRS trailing arms with this box & gusset set. Includes six-pieces. Welding is required.   

01-00-3163-0 IRS BOX KIT, 6 PCS $ 52.95

IRS Conversion Clips

Convert any swing-axle pan to IRS with these clips. welding is required.
01-00-3164-0 IRS CONVERSION CLIPS, PAIR  $ 29.95