New Drive Axle Assembles

Empi's axle assemblies are assembled from All New top quality components manufactured by Empi  

  
01-90-6900-0 DRIVE AXLE ASSEMBLY, TYPE 1 & GHIA, w/IRS 68-79, EACH  $    72.95
  
01-90-6905-0 DRIVE AXLE ASSEMBLY, THING, w/IRS 73-75, EACH  $  101.95
  
01-90-6903-0 DRIVE AXLE ASSEMBLY, TYPE 2, M/T, w/IRS 68-79, EACH  $    72.95
01-90-6901-0 DRIVE AXLE ASSEMBLY, TYPE 2, A/T, w/IRS, LEFT, 68-79, EACH  $  101.95
01-90-6902-0 DRIVE AXLE ASSEMBLY, TYPE 2, A/T, w/IRS RIGHT, 68-79, EACH  $  101.95
  
01-90-6802-0 DRIVE AXLE ASSEMBLY, VANAGON, M/T, 80-82, EACH  $  101.95
01-90-6800-0 DRIVE AXLE ASSEMBLY, VANAGON, A/T, LEFT, 80-82, EACH  $  101.95
01-90-6801-0 DRIVE AXLE ASSEMBLY, VANAGON, A/T, RIGHT, 80-82, EACH  $  101.95
01-90-6805-0 DRIVE AXLE ASSEMBLY, VANAGON, M/T, 83-92, EACH  $  101.95
01-90-6804-0 DRIVE AXLE ASSEMBLY, VANAGON, A/T, LEFT, 83-92, EACH  $  101.95
01-90-6803-0 DRIVE AXLE ASSEMBLY, VANAGON, A/T, RIGHT, 83-92, EACH  $  101.95
  
01-90-6900-0 DRIVE AXLE ASSEMBLY, TYPE 3, M/T, w/IRS 69-73, EACH  $    72.95
01-90-6907-0 DRIVE AXLE ASSEMBLY, TYPE 3, A/T, w/IRS, LEFT, 69-73, EACH  $  101.95
01-90-6906-0 DRIVE AXLE ASSEMBLY, TYPE 3, A/T, w/IRS, RIGHT, 69-73, EACH  $  101.95
  
01-90-6800-0 DRIVE AXLE ASSEMBLY, 411, 412, w/IRS, 71-74, EACH  $  101.95

Type-2 & 930's Race Axle Kits

This Axle & CV kit has everything you need all in one kit. The perfect kit for installing your 3x3 rear trailing arms
The kit comes complete with (2) 4340 Race Axles & Circlips, (4) Race Prep'ed CV's, (4) Off-Road Boots & Billet Steel Flanges, (24) CV Bolts, (4) Packs of Moly Grease and (8) Nylon Zip-Ties. 
01-16-2233-0 TYPE-2 AXLE KIT, 15-5/8" AXLES WITH 33 SPLINE, KIT $ 418.95
01-16-2232-0 TYPE-2 AXLE KIT, 19-1/4" AXLES WITH 33 SPLINE, KIT $ 418.95
01-16-2234-0 TYPE-2 AXLE KIT, 20-1/4" AXLES WITH 33 SPLINE, KIT $ 420.95
01-16-2235-0 930 AXLE KIT, 19-1/4" AXLES WITH 28 SPLINE, KIT $ 461.95
01-16-2236-0 930 AXLE KIT, 20-1/4" AXLES WITH 28 SPLINE, KIT $ 461.95
01-16-2238-0 930 AXLE KIT, 22" AXLES WITH 28 SPLINE, KIT $ 461.95
01-16-2239-0 930 AXLE KIT, 23" AXLES WITH 28 SPLINE, KIT $ 461.95

IRS Race Axles

Engineered and designed to twist or spool up like torsion bars to avoid damage to the transmission final drive and to keep the axle from snapping under extreme or race loads.  
01-16-2200-0 16 1/4" AXLES,28 SPLINE,930 CV JOINT, PR $ 217.95
01-16-2201-0 16 1/4" AXLES,33 SPLINE, T-1 & 2 CV JOINTS, PR $ 217.95
01-16-2208-0 16 3/4" AXLES,33 SPLINE, T-1 & 2 CV JOINTS, PR $ 217.95
01-16-2209-0 16 3/4" AXLES,28 SPLINE,930 CV JOINT, PR $ 217.95
01-16-2202-0 15 5/8" AXLES,33 SPLINE, T-1 & 2 CV JOINTS, PR $ 217.95
01-16-2203-0 15 5/8" AXLES,28 SPLINE,930 CV JOINT, PR $ 217.95
01-16-2224-0 17 1/2" AXLES,33 SPLINE, T-1 & 2 CV JOINTS, PR $ 217.95
01-16-2225-0 17 1/2" AXLES,28 SPLINE,930 CV JOINT, PR $ 217.95
01-16-2204-0 18 3/4" AXLES,33 SPLINE, T-1 & 2 CV JOINTS, PR $ 217.95
01-16-2205-0 18 3/4" AXLES,28 SPLINE,930 CV JOINT, PR $ 217.95
01-16-2206-0 19 1/4" AXLES,33 SPLINE, T-1 & 2 CV JOINTS, PR $ 217.95
01-16-2207-0 19 1/4" AXLES,28 SPLINE,930 CV JOINT, PR $ 217.95
01-16-2210-0 20 1/4" AXLES,33 SPLINE, T-1 & 2 CV JOINTS, PR $ 217.95
01-16-2211-0 20 1/4" AXLES,28 SPLINE,930 CV JOINT, PR $ 217.95
01-16-2212-0 21 3/8" AXLES,33 SPLINE, T-1 & 2 CV JOINTS, PR $ 217.95
01-16-2213-0 21 3/8" AXLES,28 SPLINE,930 CV JOINT, PR $ 217.95
01-16-2214-0 22" AXLES,33 SPLINE, T-1 & 2 CV JOINTS, PR $ 217.95
01-16-2215-0 22" AXLES,28 SPLINE,930 CV JOINT, PR $ 217.95
01-16-2217-0 23" AXLES,28 SPLINE,930 CV JOINT, PR $ 217.95
01-16-2219-0 24" AXLES,28 SPLINE,930 CV JOINT, PR $ 217.95
01-16-2221-0 25" AXLES,28 SPLINE,930 CV JOINT, PR $ 217.95
01-16-2223-0 26" AXLES,28 SPLINE,930 CV JOINT, PR $ 217.95
01-16-2227-0 27" AXLES,28 SPLINE,930 CV JOINT, PR $ 231.95
01-16-2228-0 28" AXLES,28 SPLINE,930 CV JOINT, PR $ 231.95

Axle Retainer Clips

Replacement IRS axle clips to hold your CV's on the axles. Comes in sets of 4
01-16-2260-0 CIRCLIPS FOR 33 SPLINE TYPE 1 & 2 AXLES,(4) $ 3.95
01-16-2262-0 SPIRAL LOCKS FOR 930 AXLES,(4) $ 3.95
01-16-2261-0 CIRCLIPS FOR 934 AXLES,(4) $ 5.95

New C.V. Joints & Kits

Replace worn and clanking CV joints. You can select the CV joint only or select the CV joint kits which include everything needed to do the job right. Includes: CV Joint, Boot, Clamp, Snap Rings and Grease.  
01-87-9916-0 TYPE-1 and 3 CV JOINT ONLY, 90mm, EACH  $ 27.95
01-87-9916-K TYPE-1 and 3 CV JOINT KIT, 90mm, EACH  $ 33.95
01-87-9917-0 TYPE-2 and VANAGON CV JOINT ONLY, 100mm, EACH  $ 28.95
01-87-9917-K TYPE-2 and VANAGON CV JOINT KIT, 100mm, EACH  $ 35.95

Type 2 Off-Road C.V. Joints

Off-road Type-2 CV joint 100mm O.D., with .750" balls & 33 spline inner race. Comes with chromoly cage. max angle up to 25*   
01-98-5084-B EMPI OFF-ROAD T-2 CV JOINT ONLY, 100mm, EACH  $ 46.95

930 C.V. Joints & Kits

When stepping up your suspension for more travel, these 930 CV joint are the right choice. You can select the CV joint kits which include everything needed to do the job right. Includes: CV Joint, Boot, Clamp, Snap Rings and Grease, or you can select CV joint only.  max angle up to 21*  
01-87-9469-B EMPI 930 CV JOINT ONLY, 108mm, EACH  $ 51.95
01-87-9469-K EMPI 930 CV JOINT & BOOT KIT, 108mm, EACH  $ 75.95

Hi-Performance 930 C.V. Joints

When getting the max angles out of your suspension, these H.P. 930 CV joint are the right choice. You can select from lightened or non-lightened, and all the H.P. 930 CV joint include 4130 chromoly cages and hardened alloy inner/outer races. max angle up to 28*
01-87-9470-B EMPI H.P. 930 CV JOINT ONLY, 108mm, EACH  $ 58.95
01-98-5094-B EMPI H.P. LIGHTENED 930 CV JOINT ONLY, 108mm, EACH  $101.95

Hi-Performance 934 C.V. Joints

For the most extreme travel and angles in long travel suspensions, these H.P. 934 CV joint are the right choice. You can select from non-lightened or lightened, and all the H.P. 934 CV joint include 4130 chromoly cages and hardened alloy inner/outer races.
01-98-5097-B EMPI 934 CV JOINT ONLY, 128mm, EACH  $ 87.95
01-98-5098-B EMPI OFF-ROAD 934 CV JOINT ONLY, 128mm, EACH  $ 94.95
01-98-5096-B EMPI OFF-ROAD LIGHTENED 934 CV JOINT ONLY, 128mm, EACH  $ 138.95

IRS C.V. Boots With Flange

Molded from high quality Neoprene and feature integral mounting flange.   
01-00-9994-0 IRS BOOT TYPE-1 W/FLANGE, BLACK, (4)  $ 14.95
01-00-9989-0 BUS TYPE-2 IRS BOOT W/FLANGE, BLACK, (4)  $ 14.95

Type-2 Off-Road C.V. Boots & Flanges

These Boots and Flanges are designed for axles with very long suspension travel found on many off road racing vehicles. Kits include Boot, Flange, and tie wrap clamps.  
01-86-9303-D TYPE 2 OFF ROAD BOOT KIT W/ FLANGE, 100mm, EACH $ 29.95
01-86-9304-0 TYPE 2 OFF ROAD BOOT ONLY, 100mm, EACH $  8.95
01-86-9305-0 TYPE 2 OFF ROAD FLANGE ONLY, 100mm, EACH $ 20.95

Off-Road 930 C.V. Boots & Flanges

These Boots and Flanges are designed for axles with very long suspension travel found on many off road racing vehicles. Kits include Boot, Flange, and tie wrap clamps.  
01-86-9300-D 930 CV OFF ROAD BOOT KIT W/ FLANGE, 108mm, EACH $ 29.95
01-86-9301-0 930 CV OFF ROAD BOOT ONLY, 108mm, EACH $ 8.95
01-86-9302-0 930 CV OFF ROAD FLANGE ONLY, 108mm, EACH $ 20.95

930 Off-Road C.V. Boot

This Boot is designed for axles with very long suspension travel found on many off road racing vehicles. Fits around CV joint.
01-86-9306-0 BOOT ONLY, FIT OVER 930 TYPE CV JOINT, EACH $ 15.95

Off-Road 934 C.V. Boots & Flanges

These Boots and Flanges are designed for axles with very long suspension travel found on many off road racing vehicles. Kits include Boot, Flange, and tie wrap clamps.  
01-86-9309-D 934 OFF ROAD BOOT KIT W/ FLANGE, FOR 934 CV JOINT, EACH $ 29.95
01-86-9307-0 934 OFF ROAD BOOT ONLY, EACH $ 7.95
01-86-9308-0 934 OFF ROAD FLANGE ONLY, EACH $ 22.95

Off-Road 934 C.V. Boots & Flanges

These Boots and Flanges are designed for axles with very long suspension travel found on many off road racing vehicles. Kits include Boot, Flange, and tie wrap clamps.  
01-86-9312-D 934 OFF ROAD BOOT KIT W/ FLANGE, FOR 934 CV JOINT, EACH $ 51.95
01-86-9311-0 934 OFF ROAD BOOT ONLY, EACH $ 25.95
01-86-9310-0 934 OFF ROAD FLANGE ONLY, EACH $ 25.95

C.V. Joint bolts

These hardened aircraft quality C.V. bolts are available in 12 point internal & external heads.
01-87-7701-0 CV BOLT FOR T-1, M8 X 1 3/4", 12pt INTERNAL, EACH $  1.95
01-16-2409-0 CV BOLT FOR T-1, M8 X 1 3/4", 12pt INTERNAL, SET OF 6 $  5.95
01-16-2410-0 CV BOLT FOR T-1 & 2, 3/8"-24X1 3/4" ALLEN HEAD, SET OF 6 $  7.95
01-16-2412-0 CV BOLT FOR T-1 & 2, 3/8"-24X1 3/4" 12pt EXTERNAL, SET OF 6 $  7.95
01-16-2413-0 CV BOLT FOR 930, 3/8"-24X2 1/4" 12pt EXTERNAL, SET OF 6 $  7.95
01-16-2414-0 CV BOLT FOR 934, 12pt EXTERNAL, SET OF 6 $ 20.95
01-16-2415-0 CV BOLT FOR ALUM FLANGE 930, 3/8"-24X2.38" 12pt, SET OF 6 $  9.95

Racing C.V. Inner Race

 

Manufactured by Empi and hardened for superior strength. These off-road/racing C.V. inner races were designed to fit the Empi CV and the original Lobro C.V. joints

01-16-2630-0 T-1 RACE ONLY (replacement to fit 01-87-9916-0 CV ), EACH $ 20.95
01-16-2609-0 T-1 HARDENED C.V. RACE, FOR 5/8" BALLS, EACH $ 20.95
01-16-2607-0 T-1 HARDENED C.V. RACE, FOR 11/16" BALLS, EACH $ 20.95
01-16-2632-0 T-2 RACE ONLY (replacement to fit 01-87-9917-0 CV ), EACH $ 20.95
01-16-2634-0 T-2 RACE PREP. C.V. RACE ONLY (replacement to fit 01-87-5084-B CV ), EACH $ 22.95
01-16-2610-0 T-2 HARDENED C.V. RACE, FOR 3/4" BALLS, EACH $ 20.95
01-16-2628-0 930 C.V. RACE ONLY (replacement to fit 01-87-9469-B CV ), EACH $ 32.95
01-16-2629-0 930 RACE PREP. C.V. RACE ONLY (replacement to fit 01-87-9470-B CV ), EACH $ 32.95
01-16-2635-0 930 RACE PREP. C.V. RACE ONLY (replacement to fit 01-98-5094-B CV ), EACH $ 32.95
01-16-2606-0 934 C.V. RACE ONLY (replacement to fit 01-98-5096-B, 98-5097-B CV ), EACH $ 32.95
01-16-2627-0 934 RACE PREP. C.V. RACE ONLY (replacement to fit 01-98-5098-B CV ), EACH $ 32.95

930 C.V. Race Kit

 

Manufactured by Empi and hardened for superior strength. These off-road/racing C.V. inner races were designed to fit the Empi CV and the original Lobro C.V. joints

01-16-2611-0 930 HARDENED C.V. RACE with BALLS, EACH $ 28.95

Chromoly C.V. Inner Cage

 

Manufactured by Empi and hardened for superior strength. These off-road/racing C.V. inner cages were designed to fit the Empi CV and the original Lobro C.V. joints. A must have for long travel suspensions.

 

01-16-2633-0 T-2, 4140 CHROMOLY HARDENED C.V. CAGE, FOR 1" BALLS, EACH $ 18.95
01-16-2615-0 930, 4140 CHROMOLY HARDENED C.V. CAGE, FOR 7/8" BALLS, EACH $ 18.95
01-16-2616-0 934, 4140 CHROMOLY HARDENED C.V. CAGE, FOR 1" BALLS, EACH $ 22.95

C.V. Inner Cage

 

Manufactured by Empi with superior strength. These C.V. inner cages were designed to fit the Empi CV and the original Lobro C.V. joints.

01-16-2617-0 T-1 C.V. CAGE ONLY (replacement to fit 01-87-9916-0 CV ), EACH $ 17.95
01-16-2631-0 T-2 C.V. CAGE ONLY (replacement to fit 01-87-9917-0 CV ), EACH $ 17.95

Racing C.V. Inner Balls

     

Manufactured by Empi and hardened for superior strength. These off-road/racing C.V. inner balls were designed to fit the Empi CV and the original Lobro C.V. joints
01-16-2624-0 EMPI CV BALLS, 5/8", FOR T-1 JOINTS, 24 PCS. $ 12.95
01-16-2625-0 EMPI CV BALLS, 11/16", FOR T-1 JOINTS, 24 PCS. $ 12.95
01-16-2620-0 EMPI CV BALLS, .873" .002" UNDERSIZE, FOR 930 JOINTS, 24 PCS. $ 13.95
01-16-2621-0 EMPI CV BALLS, 7/8", STANDARD SIZE, FOR 930 JOINTS, 24 PCS. $ 13.95
01-16-2622-0 EMPI CV BALLS, 1" , FOR 934 JOINTS, 24 PCS. $ 15.95
  

Conversion Stub Axles

These conversion stub axles are made of forged high strength alloy steel that is  precision machined and heat treated. The C.V. bolt holes are taped for 3/8" x 24 threads bolts for max strength 

 

01-16-2304-0 STUB AXLE, TYPE-1 TO TYPE 2  CV JOINT, M8 THREAD, EACH   $ 84.95
01-16-2306-0 STUB AXLE, TYPE-1 TO 930 CV JOINT, 3/8 THREAD, EACH   $ 84.95

Micro Stub Axles

These Micro-stub axles are made of forged high strength alloy steel that is  precision machined and heat treated. The C.V. bolt holes are taped for 3/8" x 24 threads bolts for max strength
01-16-2310-0 MICRO-STUB AXLE, 930 CV JOINT, 3/8 THREAD, EACH   $ 151.95
01-16-2311-0 MICRO-STUB AXLE, 934 CV JOINT, 3/8 THREAD, EACH   $ 151.95

Transmission Drive Flanges

These conversion drive flanges are made of forged high strength alloy steel that is  precision machined and heat treated. The C.V. bolt holes are taped for 3/8" x 24 threads bolts for max strength   
01-16-2299-0 DRIVE FLANGE, T-1 TRANS TO T-2  CV JOINT, M8 THREADS, PAIR   $ 84.95
01-16-2301-0 DRIVE FLANGE, TYPE-1 TRANS TO 930 CV JOINT, PAIR   $ 84.95
01-16-2302-0 DRIVE FLANGE, 002 TYPE-2 EARLY TO 930 CV JOINT, PAIR  $ 84.95
01-16-2303-0 DRIVE FLANGE, 091 TYPE-2 LATE TO 930 CV JOINT, PAIR   $ 84.95

36mm Axle Nut

High quality rear axle nut. The chrome axle nut is great for applications where the axle nut is visible.

01-16-2420-0 CHROME 36mm AXLE NUT, EACH $ 6.95

01-16-2421-0 36mm AXLE NUT, EACH $ 4.95


IRS Axle Spacer Kits

Stock axle spacers just won't hold up to the abuse of off-road and high performance. Empi's super duty hardened axle spacers are the answer.

01-16-2400-0 HIGH PERFORMANCE  REAR AXLE SPACER KIT, IRS AXLE $ 27.95


IRS Rear Wheel Bearings

Quality replacement IRS axle bearings for all bugs
01-98-5015-B IRS INNER AXLE REAR WHEEL BEARING, EACH  $ 6.95
01-98-5014-B IRS OUTER AXLE REAR WHEEL BEARING, EACH  $ 12.95

IRS Rear Seal Kit

Fits IRS. Comes with seal, gaskets, O-rings and cotter key.
01-00-9910-B REAR AXLE SEAL KIT, w/GASKETS  $ 3.95
01-98-5021-B REAR AXLE SEAL ONLY, EACH  $ 2.95

IRS Rear Torsion Bars

These super torsion bars are created from ultra-light tensile certified aircraft alloy steel. All bars are heat treated to the most exacting standards and ground to precise tolerances. A must have with any off-road or racing application.  

BP-6567-25 TORSION BARS, 1000 SERIES, 21 3/4'', 25mm $ 339.95
BP-6567-26 TORSION BARS, 1000 SERIES, 21 3/4'', 26mm $ 339.95
BP-6567-27 TORSION BARS, 1000 SERIES, 21 3/4'', 27mm $ 339.95
BP-6567-28 TORSION BARS, 1000 SERIES, 21 3/4'', 28mm $ 339.95
BP-6567-29 TORSION BARS, 1000 SERIES, 21 3/4'', 29mm $ 339.95
BP-6567-30 TORSION BARS, 1000 SERIES, 21 3/4'', 30mm $ 339.95
BP-6568-26 TORSION BARS, 1100 SERIES, 24 11/16'', 26mm $ 368.95
BP-6568-27 TORSION BARS, 1100 SERIES, 24 11/16'', 27mm $ 368.95
BP-6568-28 TORSION BARS, 1100 SERIES, 24 11/16'', 28mm $ 368.95
BP-6568-29 TORSION BARS, 1100 SERIES, 24 11/16'', 29mm $ 368.95
BP-6568-30 TORSION BARS, 1100 SERIES, 24 11/16'', 30mm $ 368.95
BP-6569-25 TORSION BARS, 1200 SERIES, 26 9/16'', 25mm $ 404.95
BP-6569-26 TORSION BARS, 1200 SERIES, 26 9/16'', 26mm $ 404.95
BP-6569-27 TORSION BARS, 1200 SERIES, 26 9/16'', 27mm $ 404.95
BP-6569-28 TORSION BARS, 1200 SERIES, 26 9/16'', 28mm $ 404.95
BP-6569-29 TORSION BARS, 1200 SERIES, 26 9/16'', 29mm $ 404.95
BP-6569-30 TORSION BARS, 1200 SERIES, 26 9/16'', 30mm $ 404.95

IRS Spring Plates

These full .250" thick spring plates will withstand the abuse of off-road. They are head treated and cadmium plated. Sold as a pair.   

BP-6576-10 SPRING PLATES FOR IRS AXLE WITH 21 3/4'' TORSION BARS $ 158.95
BP-6576-11 SPRING PLATES FOR IRS AXLE WITH 24 11/16'' TORSION BARS $ 228.95
BP-6576-12 SPRING PLATES FOR IRS AXLE WITH 26 9/16'' TORSION BARS $ 239.95

IRS Spring Plate Caps

These chrome spring plates caps will give you that show quality look. 

01-00-9569-0 CHROME SPRING PLATE CAPS- IRS AXLE, PAIR     $ 19.95

Urethane Bushing

Replace your old rubber bushings with New Urethane ones for better control and feeling car.

01-16-5130-0 URETHANE KNOBBY BUSHINGS, 1-3/4" ID, PR.     $ 12.95
01-16-5131-0 URETHANE KNOBBY BUSHINGS, 1-7/8" ID, PR.     $ 12.95
01-16-5132-0 URETHANE KNOBBY BUSHINGS, 2"  ID, PR.     $ 12.95
01-16-5133-0 URETHANE SMOOTH BUSHINGS, 1-3/4" ID, PR.     $ 12.95
01-16-5134-0 URETHANE SMOOTH BUSHINGS, 1-7/8" ID, PR.     $ 11.95

IRS Box Kit

Strengthen your IRS trailing arms with this box & gusset set. Includes six-pieces. Welding is required.   

01-00-3163-0 IRS BOX KIT, 6 PCS $ 52.95

Boxed Trailing Arms

 

These IRS trailing arms will give you tons of travel with all the strength you'll ever need for the heaviest off-roading. Takes type 1 bearings & stub axles. (See all rear arms here)
14-530012E STANDARD REAR IRS TRAILING ARMS, STOCK WIDTH X 1" LONGER, PAIR  $ 246.95
14-530012 HEAVY DUTY REAR IRS TRAILING ARMS, STOCK WIDTH X 1" LONGER, PAIR  $ 281.95
14-530015E STANDARD REAR IRS TRAILING ARMS, 3X3, PAIR  $ 235.95
14-530015 HEAVY DUTY REAR IRS TRAILING ARMS, 3X3, PAIR  $ 288.95
14-530015CM CHROMOLY  REAR IRS TRAILING ARMS, 3X3, PAIR  $ 434.95

Spring Plates Conversion Set

The Spring Plate conversion set works with all IRS trailing arms to eliminate stock torsion springs so you can run a coil-over shock. When used with the 3x3 trailing arms it will give you tons of travel with all the strength that you'll ever need for the heaviest off-roading. (Needs Heim ends and bolts, sold separate) .
14-501360 SPRING PLATE CONVERSION SET FOR CUSTOM TORSION HOUSING/ STEEL / SET  $ 52.95
14-501360S S/S SPRING PLATE CONVERSION SET FOR CUSTOM TORSION HOUSING/ SET  $ 87.95
14-501361 SPRING PLATE CONVERSION SET FOR VW TORSION HOUSING/ STEEL / SET  $ 67.95
14-501361S S/S SPRING PLATE CONVERSION SET FOR VW TORSION HOUSING / SET  $ 95.95
14-501360B 3/4-16 BOLT FOR SPRING PLATE CAP TO HEIM/ EACH  $ 2.95

Heim Joint

These 3/4" heim joint are a perfect fit for the Spring Plate Conversion sets. Made with Chromoly Race and Teflon liner. (See all heim joints here)
14-425060R 3/4" X 3/4" CHROMOLY HEIM, RIGHT HAND THREAD, EACH  $ 23.95
14-425060-JR 3/4"-16 JAM NUT, EACH  $ 1.95

IRS Conversion Clips

 

Convert any swing-axle pan to IRS with these clips. welding is required.
01-00-3164-0 IRS CONVERSION CLIPS, PAIR  $ 29.95

Urethane Rear Trailing Bushing

Install new or replace your old rubber bushings Urethane ones for better control and feeling car. 

01-16-5122-0 URETHANE I.R.S. A-ARM PIVOT BUSHINGS, PR.  $ 14.95

 

IRS Pivot Bolt w/Washers

New 17mm pivot bolt with washers .
CD-113-501-535A IRS PIVOT BOLT WITH 2 WASHERS, EACH  $ 14.95