Empi Performance Clutches

The latest addition to the Empi high performance line. Perfect for drag race, sand/off-road or high performance street applications. These 200mm pressure plates are rated at 1700 lbs and 2100 lbs, and are factory balanced with the removable center ring to cover both early and late transmissions.
  
01-00-4080-0 EMPI 1700lb. PRESSURE PLATE  $ 82.95
01-00-4082-0 EMPI 2100lb. PRESSURE PLATE  $ 82.95

Clutch Kits

Everything you need to replace your clutch in one handy kit. O.E.M. quality kit includes new pressure plate, disc, throw out bearing with clips and a clutch alignment tool.

01-32-1256-B CLUTCH KIT, 180mm  $ 106.95
01-32-1258-B CLUTCH KIT, 200mm, EARLY STYLE  $ 106.95
01-32-1257-B CLUTCH KIT, 200mm, LATE STYLE  $ 106.95

Heavy Duty Pressure Plate

These Heavy Duty Pressure plates offer strong and smooth clutch operation and improved spring pressure over stock. Available in 180 or 200mm.

01-32-1234-B H.D. PRESSURE PLATE -180MM  $ 73.95
01-32-1235-B H.D. PRESSURE PLATE -200MM, 70 & EARLIER  $ 73.95
01-32-1236-B H.D. PRESSURE PLATE -200MM, 71 & LATER  $ 73.95

K.E.P. Performance Clutches

Kennedy Clutches have long been relied on in drag racing, off-road and sand competition - as well as performance street applications. Center ring is removable for all late model style applications.

01-00-4090-0 K.E.P. STAGE-1 1700 LB PRESS. PLATE  $ 147.95
01-00-4092-0 K.E.P. STAGE-2 2100 LB PRESS. PLATE  $ 129.95
01-00-4093-0 K.E.P. STAGE-3 2600 LB PRESS. PLATE  $ 129.95
01-00-4094-0 K.E.P. STAGE-4 3000 LB PRESS. PLATE  $ 129.95

Heavy Duty Clutch Disc

Features the latest in friction materials. Available in 180 or 200mm. A perfect match for the H.D. pressure plate.

01-32-1240-0 180MM, H.D. CLUTCH DISC, RIGID HUB  $ 20.95
01-32-1245-0 200MM, H.D. CLUTCH DISC, RIGID HUB  $ 20.95

01-32-1250-0 200MM, H.D. CLUTCH DISC, SPRING HUB  $ 23.95

Super Duty 200mm Clutch Disc

Spring Steel Center Disc dampens disc action for a smoother engagement. The metal woven lining resists slip under heavy clamp loads to put horsepower to the ground.

01-00-4085-0 SUPER DUTY 200MM DISC  $ 26.95
 

Kush-Lok Clutch Disc

The brass woven lining really takes the heat. The spring steel hub is sandwiched with dampening material to absorb vibration. Couple with a Kennedy pressure plate for the perfect street or strip set-up.

01-00-4096-0 200mm KUSH-LOK CLUTCH DISC  $   57.95

4-Puck Race Disc

Features Feramic discs, stainless rivets and long splines for quality and performance. Choose from ridged hub for full lock-up or spring hub version for a little give. Recommended for competition use only.

01-00-4091-0 4-PAD 200mm RACE DISC  $   71.95

Heavy Duty Throw-Out Bearings

H.D. Throw-Out Bearings should be installed whenever replacing your pressure plate and/ or disc. Super Clips make sure it stays in place.

01-32-1205-0 H.D. THROW-OUT BEARING- 1970 & EARLIER  $ 12.95
01-32-1210-0 H.D. THROW-OUT BEARING- 1971 & LATER  $ 12.95
01-32-1208-0 SUPER CLIP FOR THROW-OUT BEARING thru 1970, Pair  $    2.95

Clutch Installation Kit

Grade 8 bolts, wavy washers and a clutch pilot tool complete any VW clutch installation.

01-32-1204-0 CLUTCH INSTALLATION KIT  $ 3.95
01-00-5302-K CLUTCH PILOT TOOL ONLY  $ 2.95

Heavy Duty Cross Shafts

Empi's Heavy Duty Cross shafts are welded at critical points for performance and stock applications.

01-98-2011-0 H.D. CROSS SHAFT, TYPE-1 & 3, 61-70, TYPE-2, THRU 67  $ 14.95
01-98-1417-0 H.D. CROSS SHAFT, TYPE-1 & 3, 71 TO 10/71  $ 14.95
01-98-1411-0 STOCK STYLE CROSS SHAFT, TYPE-2, 68-70  $ 14.95
01-98-1412-0 STOCK STYLE CROSS SHAFT, TYPE-2, 71-75  $ 14.95

Cross Shaft Bushing Kit

Re-bush your cross shaft housing for smooth action and trouble free operation.

01-98-1088-0 CROSS SHAFT BUSHING KIT, 61-72  $ 5.95

Chromoly Racing Flywheels

This Chromoly version of our lightened flywheel is the answer for anyone looking for the ultimate in durability under extreme conditions. Only available as 12 volt 200mm (130 teeth) O-ring style.

01-00-4099-0 CHROMOLY FLYWHEEL, 12 lbs 15 oz, 12V - 200MM, EACH $ 152.95

01-98-1283-B O-RING SEAL VW FLYWHEEL, EACH $  1.95

New Flywheels

Replace those old worn-out flywheels with these New high grade steel flywheels. The lightweight 12.75 lbs. version is drilled for standard 8 dowel pins. Precision ground to insure quick smooth clutch action.

01-98-1273-B FLYWHEEL, STOCK STYLE, 200mm $ 88.95
01-98-1275-B FLYWHEEL, LIGHTENED, 8 DOWEL PIN, 200mm $ 112.95

01-98-1283-B O-RING SEAL VW FLYWHEEL, EACH $ 1.95

Hi-Performance Chromoly Gland Nut

Don't take a chance on stock gland nuts in high performance applications. This ultra strong bad boy is made from 4130 chromoly. The extra strength chromoly and concave spring steel washer provide maximum holding power. Fitted with special pre-greased needle bearing and grease seal. Compatible with stock 4 dowel pin and 8 dowel pin flywheels and features a 36mm nut size.

01-00-4026-0 PERFORMANCE 4130 CHROMOLY GLAND NUT & WASHER SET  $ 23.95

Gland nut & Washer

Our Heavy Duty Nut set includes an O.E.M. type gland nut and heavy duty washer for extra load capacity and increased torque capabilities. Provides the perfect upgrade for most high performance and all stock application.

01-00-4029-0 GLAND NUT & WASHER SET  $ 13.95
01-00-4029-B GLAND NUT ONLY, EACH      $ 10.95
01-00-4030-0 WASHER ONLY FOR GLAND NUT  $  4.95