Wheel Adapters

Allows use of popular wheels without drilling drums or hubs. ( 4 lug VW is 4 X 130mm & wide 5 is 5 X 205mm.)
  
01-00-9502-0 CHEVY (4-3/4") WHEEL TO 5 LUG VW HUB/ STEEL ADAPT/ 7/16"X20 THREAD/ PAIR  $ 36.95
01-00-9503-0 VW 4 LUG WHEEL TO 5 LUG VW HUB/ STEEL ADAPT/ 1/2"X20 THREAD/ PAIR  $ 36.95
01-00-9504-0 CHEVY (4-3/4") WHEEL TO 4 LUG VW HUB/ ALUM ADAPT/ 7/16"X20 THREAD/ PAIR  $ 45.95
01-00-9505-0 FORD (4-1/2") WHEEL TO 5 LUG VW HUB/ STEEL ADAPT/ 1/2"X20 THREAD/ PAIR  $ 36.95
01-00-9506-0 VW 5 WHEEL TO VW 4 LUG DRUM, STEEL ADAPT/ TAPPED HOLES are 12mmX1.5/ PAIR  $ 52.95
01-00-9499-0 911 WHEEL TO VW 5 LUG DRUM/ STEEL ADAPT/ 14mmX1.5 TREAD/ PAIR  $ 36.95
01-00-9500-0 911 WHEEL TO VW 4 LUG DRUM/ ALUM.  ADAPT/ 14mmX1.5 TREAD/ PAIR  $ 62.95
01-00-9481-0 VW 5 LUG WHEEL TO 5X130mm/ STEEL ADAPT/ TAPPED HOLES are 14mmX1.5/ PAIR  $ 58.95
01-00-9482-0 VW 5 LUG WHEEL TO 5X112mm/ STEEL ADAPT/ TAPPED HOLES are 14mmX1.5/ PAIR  $ 58.95

Aluminum wheel Spacers

If you need more clearance on the backside of your tires, these spacers will help you out. 3/8" thick aluminum spacers that come in  5x205mm or 4x130mm bolt patterns. Sold as pairs

01-16-9925-0 ALUM WHEEL SPACERS/ 5X205mm/ PAIR  $ 57.95
01-16-9926-0 ALUM WHEEL SPACERS/ 4X130mm/ PAIR  $ 44.95

Wheel Studs & Chrome Lug Nuts

Make changing tires a little easier by installing studs on your drums or rotors. Easy installation. No drilling required. Available for use with steel or mag wheels. The lug nuts listed in this section have a 13/16" hex heads.

01-00-9515-0 WHEEL STUDS, M14-1.5 to 1/2"-20, SET OF 4  $ 3.95
01-00-9516-0 WHEEL STUDS, M12-1.5, SET OF 5  $ 3.95
01-00-9517-0 WHEEL STUDS, M14-1.5, SET OF 5  $ 4.95

01-00-9535-0 CHROME LUG NUTS, 1/2"-20 for STEEL WHEELS, SET OF 4  $ 3.95
01-00-9536-0 CHROME LUG NUTS, 1/2"-20 for MAG WHEELS, SET OF 4  $ 3.95
01-00-9537-0 CHROME LUG NUTS, M12-1.5 for STEEL WHEELS, SET OF 5  $ 4.95
01-00-9538-0 CHROME LUG NUTS, M12-1.5 for MAG WHEELS, SET OF 5  $ 5.95
01-00-9519-0 CHROME LUG NUTS, M14-1.5 for STEEL WHEELS, SET OF 4  $ 4.95
01-00-9512-0 CHROME LUG NUTS, 7/16"-20 for STEEL WHEELS, SET OF 5  $ 4.95
01-00-9513-0 CHROME LUG NUTS, 7/16"-20 for MAG WHEELS, SET OF 5  $ 4.95

01-00-9533-0 CHROME NUT & STUD KIT, M12-1.5, for STEEL WHEELS, SET OF 5  $ 7.95
01-00-9534-0 CHROME NUT & STUD KIT, M14-1.5 to 1/2"-20, for STEEL WHEELS, 8 SPOKE & RIVIERA WHEEL,  SET OF 4  $ 6.95
01-00-9510-0 CHROME NUT & STUD KIT, M12-1.5, for 5 SPOKE MAG WHEELS, SET OF 5  $ 7.95
01-00-9511-0 CHROME NUT & STUD KIT, M14-1.5 to 1/2"-20, for MAG WHEELS, SET OF 4  $ 6.95
01-00-9508-0 LUG BOLT ADAPTOR WASHERS ONLY, 60 DEGREE ACORN to BALL SEAT, SET of 4 $ 2.95
01-00-9509-0 LUG BOLT WASHERS ONLY, FLAT, SETof5 $ 2.95

Tapered Lug Washer

These tapered aluminum washers allow correct seating of lug bolts or nuts on thin walled flat surface aluminum off-road wheels. For use with 14mm studs

01-10-1035-0 TAPERED LUG WASHER, REAR ALUM WHEEL, SET 5  $  8.95

Ball Seat Chrome Lug Bolts

Replace your stock lug bolts with these Chrome lug bolts. All these bolts have a 22mm head and ball seat.

01-00-9564-0 CHROME LUG BOLT 12mm x 1.5, 15 mm LONG, SET OF 5, STEEL WHEELS  $ 13.95
01-00-9565-0 CHROME LUG BOLT 12mm x 1.5, 20 mm LONG, SET OF 5, STEEL AND ALUMINUM WHEELS  $ 13.95
01-00-9568-0 CHROME LUG BOLT 14mm x 1.5, 20.5mm LONG, SET OF 4, STEEL AND ALUMINUM WHEELS  $ 10.95

60* Chrome Lug Bolts

60* Taper fits most new Empi and other aftermarket custom wheels. Quality chrome finish. These bolts have 19mm hex heads

01-00-9711-0 CHROME LUG BOLT 12mm x 1.5, 60*, SET OF 5, For EMPI 5X205 WHEELS  $ 13.95
01-00-9712-0 CHROME LUG BOLT 14mm x 1.5, 60*, SET OF 4, For EMPI 4X130 WHEELS  $ 11.95

60* Chrome Lug Nuts (small O.D.)

Known as the "Tuner" style, these chrome lug nuts are small in diameter and will accommodate a smaller lug hole- as used on most aftermarket 5x112 and 5x100 wheels where the bolt pattern is tight.
01-00-9547-0 CHROME 60* LUG BOLTS, 14mm. SET OF 5 FOR EMPI 5X112 WHEELS  $ 11.95
01-00-9548-0 CHROME 60* LUG BOLTS, 1/2"-20. SET OF 5 FOR EMPI 5X112 WHEELS  $ 11.95
01-00-9549-0 CHROME 60* LUG BOLTS, 12mm. SET OF 5 FOR EMPI 5X112 WHEELS  $ 11.95

Chrome Wheel Locks

Chrome Wheel Locks to protect your wheels. All Empi locks are the "socket type" which helps limit stripping out.

01-70-2700-0 WHEEL LOCK SET, 12mm x 1.5, VW LUG BOLT, (SET OF 4 PCS.)  $ 20.95
01-70-2701-0 WHEEL LOCK SET, 14mm x 1.5, VW LUG BOLT, (SET OF 4 PCS.)  $ 20.95
01-70-2702-0 WHEEL LOCK SET, 12mm x 1.5, MAG NUT, (SET OF 4 PCS.)  $ 11.95
01-70-2703-0 WHEEL LOCK SET, 1/2"-20, MAG NUT, (SET OF 4 PCS.)  $ 11.95
01-70-2704-0 WHEEL LOCK SET, 1/2"-20, ACORN NUT, (SET OF 4 PCS.)  $ 11.95
01-70-2705-0 WHEEL LOCK SET, 12mm x 1.5, ACORN NUT, (SET OF 4 PCS.)  $ 11.95
01-70-2706-0 WHEEL LOCK SET, 12mm-1.5, 60*LUG BOLT, SET OF 4 PCS.  $ 20.95
01-70-2707-0 WHEEL LOCK SET, 14mm-1.5, 60*LUG BOLT, SET OF 4 PCS.  $ 20.95
01-70-2708-0 WHEEL LOCK SET, 14mm-1.5, BAL SEAT LUG BOLT, FOR 911 ALLOYS, SET OF 4 PCS.  $ 20.95

Empi Competition Studs & Nuts

Quality studs are chamfered for brake shoe clearance and feature a starting shoulder for easy nut alignment. Available for Drum or Disc Brake applications. Requires machining for press fit installation.

01-70-2850-0 STUD-DRUM, M14-1.855" LONG, BLACK, SET OF 5  $  7.95
01-70-2810-0 STUD-DISC, M14-2.20" LONG, BLACK, SET OF 5  $  7.95

01-70-2860-0 PORSCHE-STYLE NUT, ZINC, M14-1.5, SET OF 5  $  8.95

Aluminum Alloy Lug Nuts

If you have Porsche Alloy's or the desire for a quality lug nut then we have you handled. Lug nuts are made from aluminum alloy and are available black anodized or raw aluminum finish, which can easily be polished. Both are M14-1.5 x 1-1/4" long thread and are for the original metric ball seat mounting type.

01-70-2865-0 PORSCHE STYLE ALLOY LUG NUTS, BLACK ANODIZED, SET OF 5  $ 25.95
01-70-2866-0 PORSCHE STYLE ALLOY LUG NUTS, ALUMINUM FINISH, SET OF 5  $ 25.95
01-70-2867-0 PORSCHE STYLE ALLOY LUG NUTS, ALUMINUM, CHROME FINISH, SET OF 5  $ 26.95

Chrome Steel Lug Nuts

This are the same as the one's above but they are made out of steel and chrome plated
01-70-2868-0 PORSCHE ALLOY STYLE LUG NUTS, STEEL WITH CHROME FINISH, SET OF 5  $ 16.95

Long Chrome Lug Nuts

1-3/4" thread length capability allows these chrome steel 60 degree acorn style lug nuts ample clearance for most applications that have long press in studs. These are also very popular for play cars and race cars where deep dish rims make it difficult to remove and install standard depth lug nuts.

01-70-2862-0 CHROME LUG NUTS, M14-1.5 X 1-3/4' long, , SET OF 5  $  7.95

14mm VW Style Lug Bolt w/ 17mm Head

Ever had a problem with the socket being too big to fit into the hole in your wheel adapters? This new lug bolt is the answer to that problem. These nuts are zinc plated. M14-1.5 x 19mm long under the head. A 14mm thread bolt with the smaller 17mm head allows the socket to fit into wheel adapters including Empi P/N 01-00-9500-0

01-70-2863-0 LUG BOLT 14MM W/17MM HEAD(5)  $ 10.95

Chrome Wheel Caps

Chrome caps are the finishing touch for 4 lug and 5 lug steel spoke wheels. Empi emblems can also be fitted to the center caps to finish off your look.

01-00-9623-0 CHROME WHEEL CAPS FOR 5 SPOKE STEEL WHEEL, PAIR  $ 19.95
01-10-1062-0 CHROME WHEEL CAPS FOR 4 SPOKE STEEL WHEEL, EACH  $ 5.95

Spindle-Mount Wheel Center Caps

There is 2 type of Center caps for the Spindle Mount wheels. Chrome steel style, as a bearing dust cap cover and a chromed aluminum version which does the same job but also has a outer ring which covers the weld on the wheel center hub and gives your wheel a trick finished look!

01-00-9622-0 CHROME FRONT DUST CAPS, PAIR  $ 7.95
01-10-1029-0 BILLET CAP FOR SPINDLE MOUNT FRONT WHEELS, PAIR  $ 11.95

Empi Wheel Center Caps
Replacement center caps for all of Empi's new rims.

01-00-9702-0 BRM REPLACEMENT CAP ONLY, LOW CAP/ BRM LOGO, EACH  $ 11.95
01-00-9703-0 BRM REPLACEMENT CAP ONLY, LOW CAP/ NO LOGO, EACH  $ 11.95
01-00-9705-0 BRM REPLACEMENT CAP ONLY, LOW CAP/ BRM, EMPI & SPEEDWELL LOGO, EACH  $ 11.95
01-00-9715-0 BRM REPLACEMENT CAP ONLY, CHROME, LOW CAP/ BRM, EMPI & SPEEDWELL LOGO, EACH  $ 16.95
01-00-9704-0 BRM REPLACEMENT CAP ONLY, TALL CAP/ BRM, EMPI & SPEEDWELL LOGO, EACH  $ 13.95
01-00-9733-0 BRM REPLACEMENT CAP ONLY, CHROME, LOW CAP/ EMPI LOGO, NEW BEETLE ONLY, EACH  $ 16.95

01-00-9706-0 911 ALLOY REPLACEMENT CAP ONLY, POLISHED S/S/ NO LOGO, EACH  $ 13.95
01-00-9718-0 911 ALLOY REPLACEMENT CAP ONLY, CHROME/ EMPI LOGO, EACH  $ 25.95
01-00-9717-0 911 ALLOY REPLACEMENT CAP ONLY, SILVER/ EMPI LOGO, EACH  $ 25.95

01-00-9707-0 SPRINTSTAR, RIVIERA & 914 ALLOY REPLACEMENT CAP ONLY, CHROME, EMPI LOGO, EACH  $ 9.95
01-00-9708-0 GT-8 REPLACEMENT CAP ONLY, CHROME w/HARDWARE, EMPI LOGO, EACH  $ 10.95
01-00-9709-0 5-RIB & GT-5 REPLACEMENT CAP ONLY, CHROME w/HARDWARE, EMPI LOGO, EACH  $ 10.95
01-00-9720-0 TORQUE STAR & EMPI DISH REPLACEMENT CAP ONLY, CHROME, EMPI LOGO, EACH  $ 11.95
01-00-9721-0 RAIDER REPLACEMENT CAP ONLY, PLAIN, NO LOGO, EACH  $ 8.95

Empi Wheel Center Caps (Old Style)

The finishing touch for your old style Empi 5 & 8 Spoke Wheels. Polished Aluminum with Empi logo. Both tall and short caps can be used on old style 5 & 8 spoke wheels. Short cap may not clear on I.D. of some particular applications.

01-00-9567-0 REPLACEMENT CAP ONLY, BLACK, NO LOGO, FITS AE & RK, EACH  $ 4.95
01-00-9574-0 REPLACEMENT CAP ONLY, CHROME, NO LOGO, FITS AE & RK, EACH  $ 7.95
01-00-9674-0 REPLACEMENT CAP ONLY, CHROME, WITH LOGO, FITS AE ONLY, EACH  $ 8.95
01-00-9619-0 ALUMINUM WHEEL CAPS, SHORT, w/EMPI LOGO, SET OF 4  $ 49.95

Valve Stems

Valve stems with chrome sleeves and chrome steel hex caps
01-00-9710-0 CHROME VALVE STEMS, SET OF 4  $ 8.95

Flush Mount Valve Stems

Using these flush mount valve stems adds to the appearance of any custom wheel. Stem adaptor is attached for inflation and replace by a smooth cap for a smooth, clean look.
01-00-9514-0 FLUSH MOUNT VALVE STEMS, SET OF 4  $ 16.95

Empi Emblem Hub Caps

These 356 style nipple hubcaps look great with stock wheels with or without beauty rings and even better with chrome stock style wheels. The mirror finish chrome and colorful enameled Empi badge is a real standout. Fit stock VW and stock style chrome wheels.

01-10-1056-0 EMBLEM HUB CAP FOR LATE 4 LUG WHEEL, EACH  $ 23.95
01-10-1058-0 EMBLEM HUB CAP FOR EARLY 5 LUG WHEEL, EACH  $ 23.95

Chrome "Smoothie" Hub Cap

Chrome smoothie for that clean finish. Fits any stock VW wheel or stock style chrome wheels.

01-10-1060-0 CHROME SMOOTHIE CAP FOR LATE 4 LUG WHEEL, EACH  $ 11.95
01-10-1061-0 CHROME SMOOTHIE CAP FOR EARLY 5 LUG WHEEL, EACH  $ 15.95

Empi Stock Style Hub Caps

We've incorporated the Empi globe logo into the stock hub cap design to make a great looking alternative to original hub caps. High luster chrome compliments painted or chrome stock type wheels.

01-10-1063-0 EMPI STOCK STYLE HUB CAP FOR LATE 4 LUG WHEEL, EACH  $ 16.95

Wheel Knock Offs

The original sports car look. Choose from 2 spoke sport car style or 3 spoke spinner style. Both types fit most mag wheels and are available in show chrome or black high gloss power coat finish. Includes all mounting hardware.

01-00-9620-0 CHROME 2 SPOKE KNOCK-OFFS, SET OF 4  $ 40.95
01-10-9620-0 BLACK 2 SPOKE KNOCK-OFFS, SET OF 4  $ 40.95

01-00-9621-0 CHROME 3 SPOKE KNOCK-OFFS, SET OF 4  $ 40.95
01-10-9621-0 BLACK 3 SPOKE KNOCK-OFFS, SET OF 4  $ 40.95

Stainless Steel Beauty Rings

For a long lasting appearance stainless steel is the way to go. Made to fit the O.E. steel wheels, these are available in both a 14" & 15" version. Sold in a set of 4.

01-10-1068-0 STAINLESS STEEL WHEEL TRIM RINGS, 14", SET OF 4  $ 76.95
01-10-1069-0 STAINLESS STEEL WHEEL TRIM RINGS, 15", SET OF 4  $ 79.95

Beauty Rings

Aluminum Beauty Rings add that finishing touch to your stock rims.

01-00-9553-0 BEAUTY RINGS, EARLY, 49-65, SET OF 4  $ 56.95
01-00-9554-0 BEAUTY RINGS, EARLY, 66-67, SET OF 4  $ 56.95
01-00-9555-0 BEAUTY RINGS, LATE, 68-72, SET OF 4  $ 56.95
01-00-9556-0 BEAUTY RINGS, LATE, 74-79, SET OF 4  $ 56.95

Billet Hub Cap Pullers/ Jack Hole Cover

An old idea with a modern twist. Made from Billet Aluminum 6061-T6, Empi's Billet Aluminum Hub Cap Pullers offer a 21st century high tech version of an old favorite. Two spring steel wire fingers hook into the drain holes in the edge of the hub cap for easy removal while eliminating damage to the wheel or hub cap caused by using screw drivers to pry them off. Neatly store in the jack ports while not in use. Available with polished smooth finish or with a diecast Empi globe logo for the ultimate stylish look.

01-10-1075-0 EMPI OVAL HUB CAP PULLER-SMOOTH, PAIR  $ 29.95
01-10-1076-0 EMPI OVAL HUB CAP PULLER-w/EMPI LOGO, PAIR  $ 42.95

Vintage Style Hub Cap Puller/Hole Cover

Empi also offers a reproduction of the original accessory hub cap pullers. Perfect for your stock restoration. Polished stainless cover on plastic body and plated wire just like the originals.

01-10-1065-0 VINTAGE STYLE HUB CAP PULLER, PAIR  $ 16.95
01-98-0113-0 O.E. TYPE TOOL KIT HUB CAP PULLER, EACH  $ 2.95

Spindle-Mount Wheel Bearings

This kit comes with 2 inner and 2 outer sealed bearings. Designed for aluminum spindle mount rims only (will not fit on stock VW drums/disc)
01-10-1001-0 BUGGY, FRONT MOUNT SPINDLE WHEEL BEARING KIT, (4)  $ 20.95

Aluminum Link-Pin Spindle Clamp Nuts

Machined Aluminum nuts for all Link-pin front spindles.
01-00-9616-0 ALUM. LIN-PIN CLAMP NUTS, PR.  $ 14.95